CADWELL Apollo EEG Patient Instructions For Use

Apollo Apollo
Recorder Amplifier
Patient Instructions for Remote Study
1. Once home, open the Apollo carrying
case.
2. Plug the NUC PC into a wall power
outlet and power it on.
3. Plug the remote hotspot into a power
source (a wall power outlet or the NUC
PC) and power it on.
4. Connect the Apollo Recorder to the
NUC PC with the USB connector, and
connect the QVM3 to the NUC PC.
5. Call your provider's office.
Provider Name and Phone Number
Cadwell Industries, Inc.  909 N Kellogg Street, Kennewick, WA 99336, U.S.A.  1(800) 245-3001  PH: (509) 735-6481  Fax: (509) 783-6503
Patient Instructions for remote monitoring
(Q-Video Mobile 3)
www.cadwell.com  www.estore.cadwell.com  supplies@cadwell.com
QVM3
6. Follow any additional provider
instructions.
7. Disconnect the Apollo Recorder and
QVM3 from the NUC PC. Your provider
will end the phone call.
8. Ensure your image is always visible on
the QVM3 camera screen. Plug in the
QVM3 to power at night to charge the
batteries and power the night mode.
9. At the end of the study, unplug the
NUC PC and hotspot from power and
return their power cables and USB ca-
bles to the case.
10. Put QVM3 and cables in its case.
11. Return to your provider's office for re-
moval of electrodes and to return the
entire Apollo system.
NUC PC
(Personal Computer)