Summary of Contents for Prime Karts Turbo Bike
- Page 1 Assembly Instructions Model: Turbo Bike Prime Karts 9235 Roe Street Pensacola, FL 32514 www.primekarts.com Tel. 850-475-0450 Email: info@primekarts.com...
- Page 2 TURBO Bike Each assembly set includes: Unpack your PRIME Turbo Bike (A) 2-rear wheel hub caps Make sure there is no shipping (B) 1-frame connection bolt, 2-washers, 1-lock nut damage and verify all of the (C) 4-bolts, 4-lock nuts, 8 washers (handle bar) components.
- Page 3 Slide the back bumper onto the bottom frame. A rubber hammer may be used to tap the bumper into place if The wheel bolts and washers are pre- needed. Attach using hardware Stand the rear assembly on end so it installed on the rear axles.
- Page 4 Inflate the front tire to 50 psi and inflate the rear tires to 28 psi Once your PRIME Turbo Bike is assembled and all bolts are tight, you are READY TO RIDE! Don’t forget to check that ALL of the nuts and bolts are tight as some may lave loosened up during shipping.
Need help?
Do you have a question about the Turbo Bike and is the answer not in the manual?
Questions and answers