lOWATT
Wireless Charging Alarm Clock
ITEM 24714
USER MANUAL - ENGLISH
Main Features
1.
Time Display Mode: 12 or
24
hour time display
2.
Calend
a r Mode: Display month and date
「
3.
Alarm Mode: Triple alarm time setting
4.
Temperat
ure mode: Range from 0° C - 50° C (32° F - 122° F)
u r e u r e
5.
3 Display Modes dp-7,dp-2 and dp-3
6.
Power saving mode: Activate LED display by touch
7.
Power supply: 3xAAA Batteries for LED display (not included) or
USB Cable Included for the wireless charger function)
CR2032 battery(included)to keep time memory
Operating Instructions
After power on, LED turns on with a beeping sound and will enter the time
setting mode. Under time display mode, press the SET button to check below in
sequence Time-> Calendar-> A 1 (Alarm 1), A2 (Alarm 2), A3 (Alarm 3)
Setting
1.
Under the Time Mode, press and hold the SET button for 2 seconds to
set the clock.
2. Press the SET button repeatedly to set the time in the following
sequence: 12124hr switch over「-> Hour-> Minute->Exit
3. Press the UP/ DOWN buttons to adjust the hour and minute digits. Press
and hold the UP/ DOWN buttons to speed up the scanning of the digits.
When the 12-hour format 1s set, the PM indicator on the top left
4.
corner will appear in the afternoon
The setting mode will return to time display mode if there is no
5.
operation for 15seconds
Date Setting
1.
Under the Calendar Mode, press and hold the SET button
set the date
2.
Press the SET button repeatedly to set the date as the following
sequence. Year - >month -> day->Exit
3.
Press the UP/ DOWN buttons to adjust the year
and hold the UP/ DOWN buttons to speed the scanning of the digits
4.
The setting mode
15 seconds
「
Alarm Setting
3 different aIarm time settings a
times 1n memory
1.
Under the Alarm Mode A1, press the UP button to turn on the ala
and press again to turn off
2.
When
A1
is
activated,'oN
Enter to alarm time display
3.
Press the SET button fo
can set the alarm time
4.
p
ess UP/DOWN buttons to adjust the alarm time. P
「
UP/DOWN button to speed up the scanning of the d1g1ts
5.
When the Alarm is activated, the Alarm Symbol will turn on
6.
The setting mode will exit f
*A2 and A3 alarm can be set 1n the same way as A1
*Alarm will ring for
1
*Please
note the alarm symbol will stay on and will ring the next day at the same
time unless deactivated in the alarm settings
Temperature Display
*After the
power is turned on, the clock will automatically detect the current
room temperature and update the temperature every 60 seconds
* Pr
ess the DOWN button for seconds to switch between Celsius(° C) and
Fahrenheit(° F)
FULL Screen Display
PM Indicator
OTHER FUNCTIONS
Voice Activation
/
Alarm Symbol
The Voice Activation feature will turn on the LED time and temperature
reading when you make a noise (like a clap) o
Temperature Symbol
is a power saving mode that can be turned off if you want the display to show
all
the time
Display Modes
Under clock, calendar or temperature more, press the UP button to
between Dp-7, Dp-2 and dP-3 display modes
dp-1 mode:
LED alternately displays time and date. Time will display for 10
seconds, date will display for 2 seconds For example: press the UP button to
Time
enter the dp-1 Mode, after setting 1t return back to time display.
mode, the LED display will alternate 1n the following sequence· -> time
(10seconds)-> date(2seconds)
dp-2 mode: Press
the UP button to ente
(Time, Date o
Alarm)to keep this mode on the screen. For example Press the
「
UP button to enter to the dp-2 mode,
time display. If you always want to keep Time display showing, press the
button to enter Time mode, the screen will keep Time display. If you always
want to keep Date display showing, press the SET button to ente
the screen will keep the Date display If you always want to keep Alarm
display showing, press the SET button to enter Alarm mode, the screen
keep the Alarm display
for
2 seconds to
month and date Press
,
will
eturn to time display mode if there is no operation fo
r
e possible and you can store 3 different ala
「
m
「
A1' will appear on the display, quickly then it will
r 2
seconds and the display
will
flash now you
ess and hold the
「
there
is no operation for 15 seconds
minute at the set time, p
ess any button to stop the alarm
「
Touch Feature
by touching the unit. Note this
「
switch
Under
display
hedp-2 mode, set you
desired
mode
门
「
after
settings are finished it return back to
SET
r
Date mode,
will
dp-3
mode: Press the UP button to enter thedp-3 mode, under this mode ,
the screen default Time will always display after 15 seconds For example
press the SET button to check Time->Date->Alarm as sequence, it
automatically return back to Time display after 15 seconds if there is no
operation.
Power saving and Touch control mode
*The default mode is Sd (power saving off) Under Time Mode press the
key to turn on the Power Saving Mode. The clock will then display 'oN
DOWN
Sd' DOWN again to turn off the Power Saving
without any operation on For 30 seconds, the LED display will automatically turn
m
「
off..*Unde
Power Saving Mode touch the LED clock or touch the table to turn
「
on the LED display.*Under power saving Mode when alarm is ringing the
LED display will automatically turn on
Built in Time Memory
Built in
CR2032 battery keeps the time running when power is off,
functions cannot be used If time memory doesn''t work anymore
replace the built in CR2032 battery behind the battery compartment
Specifications
> n put: 5V 2A, 9V 1.5A
>Output 5V1A,9V1A
> Stand by Power
<0 2W
「
> Charging Distance:5-7 0 MM
> Charging Effect 75%
> Charging Power: 10 W
> Power Supply USB 5V / 3*AAA battery case (battery not included)
/ button battery included for clock
Package contents
Wireless Cha
g1ng Alarm Clock x 7
「
Micro USB Power Cable x 1
will
Mode.*Under
Power Saving Mode,
but other
please
,
Need help?
Do you have a question about the 24714 and is the answer not in the manual?
Questions and answers