Advertisement
USER GUIDE
Tag Set-up
To get started with your Tag you'll need:
– Your CleanSpace Tag
– A Pen / any object to access the Tag's reset button
– A CleanSpace account. If you don't already have one then you can Register here.
– To install the latest version of the CleanSpace App available from the
App Store
or
Google
Play.
First: Install the app!
– Download the CleanSpace App and install it on your phone.
– Sign in with your CleanSpace account to start using the App.
How to reset & wake the Tag up!
– On the side of your Tag, you'll see a small reset button (this looks like a small hole).
– Reset: use a pen and press the reset button for 8 seconds. This will reset your Tag and put into
Sleep Mode. This will delete any readings on the Tag.
– Wake up: use a pen and press the reset button shortly when prompted to do so from the app. This
will cause the LED to light up for about 5 – 7 secs and go off again. This will wake up the Tag and put
it into Pairing Mode.
Pair the Tag with your CleanSpace App
1. Make sure your Bluetooth and Wifi/data are on.
2. Open the CleanSpace App.
3. Place your phone close to the Tag.
4. Go to the Air tab in the App, and then choose to view the Air Graph.
1
©2015 Drayson Technologies (Europe) Limited
CleanSpace Tag
Advertisement
Table of Contents
Summary of Contents for DRAYSON Cleanspace CS-TAG1
- Page 1 1. Make sure your Bluetooth and Wifi/data are on. 2. Open the CleanSpace App. 3. Place your phone close to the Tag. 4. Go to the Air tab in the App, and then choose to view the Air Graph. ©2015 Drayson Technologies (Europe) Limited CleanSpace Tag...
- Page 2 5. Press the Pair a Tag button, followed by the ‘Pair now!’ button. It can take up to 30 seconds for the pairing to be completed. You will be prompted to wake up your Tag. 6. When ‘Bluetooth Pairing Request’ appears on your screen press Pair. ©2015 Drayson Technologies (Europe) Limited CleanSpace Tag...
- Page 3 7. Wait until the pairing process is 100% complete. You can see now the Tags measurements in My Air section by pressing on My Air button. 8. Now you’re good to go. Just remember that the Tag needs up to 2 hours to calibrate. ©2015 Drayson Technologies (Europe) Limited CleanSpace Tag...
- Page 4 Use a pen and press the reset button for about 8 seconds. This will reset your Tag. Then press shortly to put your Tag into pairing mode. Press Try Again and follow steps 5-7 in section Pair the Tag with your CleanSpace App ©2015 Drayson Technologies (Europe) Limited CleanSpace Tag...
- Page 5 You must be connected to the internet to register your Tag (when you try to Pair). Switch on Data services or WIFI on your phone, then Press Try Again and follow steps 1-7 in section Pair the Tag with your CleanSpace App ©2015 Drayson Technologies (Europe) Limited CleanSpace Tag...
- Page 6 Tag and choose ‘Forget this Device’. Reset the Tag and Wake it up, as shown in How to reset & wake the Tag up! section, and then follow steps 1-7. See your Readings Go to the Air tab and then visit the Air Graph screen to see your data appear – this can take up to 30 seconds. ©2015 Drayson Technologies (Europe) Limited CleanSpace Tag...
- Page 7 (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. L’ CleanSpace Tag a été testé et répond aux limites applicables en matière d’exposition aux fréquences radio (RF). ©2015 Drayson Technologies (Europe) Limited CleanSpace Tag...
Need help?
Do you have a question about the Cleanspace CS-TAG1 and is the answer not in the manual?
Questions and answers