Advertisement
Quick Links
Press SETUP
Press NEXT to setup your
Flow Meter
NB: Please have your Pulse
Per Litre (PPL) factor from
your flow meter to hand.
For Hardi ½ inch – 120ppl
For Hardi ¾ inch – 50ppl
Press NEXT to accept the
L/Ha
Press EDIT and change the
number of sections required
to control.
Press NEXT
V1.0
Quick Start Guide – Jackal Spray Control
Setup – Auto Mode
Highlight WIZARD & press
SELECT
Press the DOWN arrow to
Manual Ratio 500.00 &
Press EDIT
Refer to page 28 of the
manual to use the Auto Set
function
Press NEXT
(Don't worry about editing
the alarm values)
Using the NAV & EDIT keys,
highlight and edit the
section width values as
required. Press NEXT
www.farmscanag .com
Highlight Sprayer &
Press NEXT
Using the NAV buttons enter
the PPL factor as displayed on
the flow meter tag.
Press EXIT when done.
NB the placement of the
decimal point
Press NEXT
(Don't worry about editing the
Name for the front screen)
AM-JACKAL-C-QG
Select Spray AUTO
Press NEXT to accept the
new manual ratio (PPL)
Select Wheel or GPS
Setup Guides for each of
these can be found on
Pages 22 to 24
Page 1
Advertisement
Summary of Contents for FARMSCAN AG Jackal
- Page 1 Quick Start Guide – Jackal Spray Control Setup – Auto Mode Press SETUP Highlight WIZARD & press Highlight Sprayer & Select Spray AUTO SELECT Press NEXT Press NEXT to setup your Press the DOWN arrow to Using the NAV buttons enter...
- Page 2 Now that you have completed the wizard you will need to check the Jackal is controlling your section valves and that the regulating valve is opening in the correct direction. This can be achieved by standing still and enabling the SIMULATE SPEED option.
- Page 3 3. Ensure the monitor is NOT on hold My Rate is all over the place what can I do? 1. Check you have a stable speed input (The Jackal controls to varying speed) 2. Ensure you have enough flow & you have no restrictions, blocks, dirty filters 3.
- Page 4 Press Setup & confirm the NMEA messages are registering as Y. You can also press EDIT to change the Baud Rate of the GPS. The Jackal will take in both GPS & GLONASS messages. How do I change the decimal place values? Setup >...