GB - User Manual Table of contents Safety Instructions ............................. 6 Identification of parts ............................8 Assembly ................................8 Labels ................................. 9 Before use ................................ 10 Use ................................... 10 How to maintain .............................. 11 How to store ..............................11 Troubloeshooting ............................11 Vibration and noise............................
Page 7
- The operator is obliged to read and follow the machine instruction manual and the engine instruction manual before starting the machine. - That during the operation of the machine safety equipment should be worn. - Information regarding the holding points which allow the machine to be handled. - Intended use: cleaning.
- Contact always your local dealer for service and repair. Service should always be carried out by an authorized Kwern serviceshop. Otherwise will result in lost warranty right. - Only use original spareparts. Use of un-original parts will result in lost warranty right.
Mount the upper handlebar with the lockparts and knobs. Pay attention left and right handlebar are different. Picture 4 Mount the brush on the brushhead. Be aware to place a washer between the holder and the nut. Picture 5 Mount the brushhead with the bolt and nut. Make sure it is securely fastened.
Do not remove or Do not have Do not smoke. tamper with the open flames. protective- and safety devices. Do not touch a Beware of thrown hot muffler, Keep hands and objects gear housing feet away or cylinder. Before use Make sure you are wearing correct protective clothing before operation the machine.
Tilt the machine left or right to increase pressure on the brush. When increasing the pressure the brush cleans the surface better. The will wear the brush faster. Do not drive the brushes directly against a wall, curb or the like. This will damage the brushes and reduce life expectancy.
3. Running the engine at idle speed will reduce vibration and noise. 4. Only operate the machine in an open environment to reduce noise. General description Model GREENBUSTER GREENBUSTER Pro 66 Engine Briggs & Stratton 500 E Engine (CC) Working width (mm)
Need help?
Do you have a question about the GREENBUSTER Pro 66 and is the answer not in the manual?
Questions and answers
What kind of oil does the keren pro 66 use?
The Kwern GREENBUSTER Pro 66 uses 0.6 liters of oil, but the specific type of oil is not mentioned.
This answer is automatically generated