Smart KaKoon J-LINK How To Use

How To Properly Use J-LINK
Each J-LINK set comes with two (2) individual links. It is recommended to
have a minimum of two (2) sets (a total of 4 J-LINKs for most projects.
If you are securing a large object, then four (4) sets (a total of 8 J-LINKs) is
needed to secure each corner.
Each set can support up to 800 lbs. Working load. When using two or four
sets, the weight is evenly distributed, allowing you to secure heavier cargo.
1. Choose your secure point. 2. Insert tarp or blanket into
J-LINK and press together.
4. Apply tension and secure. 5. If needed, secure interior
J-LINK to cargo.
Smart KaKoon, LLC
www.smartkakoon.com
Info@smartkakoon.com
3. Insert connector for your
strap/bungee/etc.
How To Secure Cargo in a Tarp
1. Place your cargo on your tarp.
3. Envision a straight line between
cargo and exterior secure point.
5. Assemble outer and inner J-Links, positioned and ALIGNED with your envisioned straight
line between connection points.
IMPORTANT: This is to minimize
any twisting or stress on the
covering when the load is drawn
down tight.
2. Select a safe secure point on cargo
and attach strap.
4. Position covering with the internal
and external J-LINKs so slack remains
on all sides and connect J-LINKs.