The AVATAR CDT leveraged our knowledge and technologies in the Digital Domain, we integrated the famous Philips CDM4/19 laser assembly in the AVATAR along with a dozen of Ultra Low Noise, Precision Linear Power Regulars along with dual oversized O-Core Transformers, delivers clean power to the digital circuitry effortlessly.
– CR2032 battery is required Disc Loading To open the AVATAR top loading door, slide the lid towards the rear of the unit fully. The CDM4 assembly shall be visible, and the Disc Clamp shall be accessible. Lift the Disc Clamp gently by holding the centre part of the Disc Clamp. Place a disc to the centre of the disc holder.
Description: (1) AC Power Supply CAUTION! AVATAR supports worldwide AC mains, range from 100-250VAC. The Please use a good quality power cord with earth/ground pin connected (2) Digital Signal Output #1 (Async) There are two groups of Digital Output. Digital Output #1 uses the internal Crystal Oscillator Clocks.
5. WARRANTY DENAFRIPS AVATAR purchased from the Authorized Distributor comes with 12 months of warranty from the date of purchase / delivery (whichever later). Defective Warranty Policy Within First 30 Days DENAFRIPS to bear both way shipping fee. Within 1st Year Customer to bear one-way shipping fee.
Need help?
Do you have a question about the AVATAR and is the answer not in the manual?
Questions and answers
Hi, I am trying to sync the avatar clock with the DCS Varese system but it cannot work. Can you advise how to get this done ?