Download Print this page

Advertisement

Quick Links

EN INSTALLATION GUIDE
EN
WARNING! RETAIN FOR FUTURE REFERENCE. TO
AVOID SERIOUS INJURY OR DEATH PLEASE READ
CAREFULLY AND FOLLOW ALL INSTRUCTIONS.
WARNING! Parcels or accessory items, or both, placed
on the unit may cause the unit to become unstable.
WARNING! Recommended maximum weight for the
accessory hooks not to exceed 7.5 lb (3.4 Kg).
WARNING! Excessive weight applied to the accessory
hooks or the unit may cause a hazardous unstable
condition to exist.
WARNING! NEVER LEAVE THE CHILD UNATTENDED.
WARNING! Avoid serious injury from falling or sliding out.
Always use restraint system.
WARNING! Designed for Infants Only. Age up to 3.5
years and weighing less than 50 Ib. Keep one hand on
the child at all times.
Lay child in the centre of the changing table and clip together
the ends of the restraint belt. The belt should fit adequately so
the child cannot roll off the table or slide out of the restraint
belt. The restraint belt should never be tightened to the extent
that it interferes with the breathing of the child.
To shorten or lengthen the restraint belt pull the buckle in the
appropriate direction.
• All assembly fittings shall always be tightened properly.
• Follow mounting instructions carefully to assure secure
mounting to various types of wall material.
• Be aware of the risk of open flame. Do not mount the unit
near strong heat sources, such as electric furnaces, gas
heaters, radiators and fireplaces, etc.
• ALWAYS check restraints to make sure they are securely
fastened to the unit.
• Maximum weight of the child for use is 50 Ib (22.7 kg).
• This unit has a Changing Pad dispenser. Paper Changing
Pads should be stocked regularly to provide a safe and
sufficient barrier between the baby and changing bed.
• The Baby Changing Unit should be cleaned daily with a
disinfectant cleaner.
Check mountings for tightness on a regular basis.
If in doubt about the adequacy of sub-strate strength carry out
load test or confirm with a competent person.
FLOOR
FLOOR
BM_US_EN_020311 ISSUE A
15.75" (400 mm)
9.25" (235 mm)
19.68" (500 mm)
A
MODEL: JBABYVERT
B
MODEL: JBABYHOZII
A
x4
3
x4
A
B
x4
3
x4
B
8mm (0.31")
1
2
1
2

Advertisement

loading

Summary of Contents for BabyMinder JBABYVERT

  • Page 1 EN INSTALLATION GUIDE BM_US_EN_020311 ISSUE A MODEL: JBABYVERT WARNING! RETAIN FOR FUTURE REFERENCE. TO AVOID SERIOUS INJURY OR DEATH PLEASE READ CAREFULLY AND FOLLOW ALL INSTRUCTIONS. WARNING! Parcels or accessory items, or both, placed on the unit may cause the unit to become unstable.
  • Page 2 Mounting on concrete, brick Mounting on timber s tuds or masonry wall ceramic tile over timber studs 1. Offer up the unit and mark wall for one of the top fixing positions In order to avoid undue splitting of the timber the minimum edge distance from the centre line of the screw shall be 35mm i.e.

This manual is also suitable for:

Jbabyhozii