Features And Controls; Front Control Panel - Hamstead Soundworks Artist 20 User Manual

Features & Controls

FRONT CONTROL PANEL

•
HI & LO INPUTS: HI is the standard input. LO has a lower impedance which rolls off a
small amount of the high frequencies and lowers the available gain.
•
BRIGHT SWITCH: With the Gain, Bass and Treble at 12 o'clock, the Bright Switch
boosts at 10kHz by 8.5dB in the UP position, is neutral in the MIDDLE position, and
boosts by 4.5dB in the DOWN position.
•
GAIN: Controls the signal level through the pre-amplifier.
•
BASS: Allows the BASS frequencies to be decreased or increased relative to the 12
o'clock position.
•
VOICE: When selected will give a mid boost at 800Hz. The level of boost can be
preset on the back panel. This can also be operated from the TWIN/QUAD
FOOTSWITCH.
•
TREBLE: Allows the TREBLE frequencies to be decreased or increased in amplitude
relative to the 12 o'clock position.
•
REVERB DEPTH: Controls the amount of REVERB.
•
REVERB SWITCH: Switches the REVERB ON. This can also be operated from the
QUAD FOOTSWITCH.
•
REVERB TONE: From the 12 o'clock position rotate anti-clockwise to give the
REVERB a bass boost and Treble Cut, or clockwise for a treble boost and bass cut.
•
TREMOLO DEPTH: Controls the amount of TREMOLO from 0 to 100%.
•
TREMOLO SWITCH: Switches the TREMOLO ON. This can also be operated from
the QUAD FOOTSWITCH.
•
TREMOLO SPEED: Controls the SPEED of the TREMOLO from 0.4Hz to 15Hz.
•
MASTER: Master Volume control.
•
POWER: Indicates that the amplifier is on.
8