2- and 3-hand models, date/big date display models - type a, date/big date display models - type b, automatic & multi-eye models, with retrograde day/date, analog chronographs 1/10 of a second, digital models
9:00 PM and 3:00 AM Doing so could damage the calendar mechanism NOTE: The functioning of the watch is not affected during date setting When the watch is running, the date will change gradually during the period from 9:00 PM to 3:00 AM...
To set the Time: Once the watch is running, pull the crown out to position 2 and turn it in either direction to set hands to desired time, then push crown back in to position 1...
oPeRaTInG InsTRUCTIons Multi-eye Models with Retrograde Day/Date Minute hand Hour hand Crown Day hand Date display Seconds hand Crown Positions: Position 1 - Normal position Crown pushed against case Position 2 - To set DATE*: Rotate crown counterclockwise To set DAY: Rotate crown clockwise Position 3 - To set TIME: Rotate crown in either direction *NOTE: If the Date is set between 9:00 PM and 1:00 AM, the date...
4 Push crown in one click to position 2 5 Turn crown counterclockwise until Date hand points to correct date 6 Push crown in to position 1, flush against case Your watch is now set to correct day, time and date Project #:...
NOTE: If the Date is set between 9:00 PM and 1:00 AM, the date may not change on the following day Your watch features a dual-time dial with 24-hour GMT hand that allows you to monitor the time in a second time zone anywhere in...
oPeRaTInG InsTRUCTIons Chronographs Chronograph minute hand Hour hand Minute hand Crown Date display Chronograph Small seconds hand seconds hand A chronograph combines two time-keeping functions: In addition to indicating the time on its dial, a chronograph can also be operated like a stopwatch to measure intervals of time oPeRaTInG InsTRUCTIons analog Chronographs 1/1 of a second –...
5 Take an accurate time signal (from a radio news station, for example) When audible tone signals the precise time, push crown back in to position 1, flush against case Watch will restart, now set to the exact second...
The instant the audible tone signals exact time, push W - Day of week corrector (at 10 o’clock) crown back in to position 1. Watch will restart, now set to the K - Month corrector (at 2 o’clock) exact time.
6. Press button A to stop chronograph. 5. Use corrector button W (on side of case at 10 o’clock) to ad- vance day of week shown in day window D. 7. Take a reading of the final time, for example: 27 minutes, 3 seconds, 4/10 seconds.
TIPS: We recommend that you adjust one side of the bracelet at a time To ensure that the watch will sit properly on the wrist, it is best to remove/add an equal number of links on each side If you must remove an odd number, take the extra link from the 6 o’clock side...
Hour hand time To ensure that the watch will sit properly on the wrist, it is best to remove/add an equal number of links on each side If you must remove an odd number, take the extra link from the 6 o’clock side...
Page 15
TIPS: We recommend that you adjust one side of the bracelet at a time To ensure that the watch will sit properly on the wrist, it is best to remove/add an equal number of links on each side If you must STOPWATCH remove an odd number, take the extra link from the 6 o’clock side...
CAUTION: Do not press the push-buttons on a chronograph model when the watch is under water, or it will not remain water resistant NOTES: We recommend that you do not get your leather strap...
Page 17
WATCH CARE AND MAINTENANCE, OPERATING INSTRUCTIONS WARRANTY AND SERVICE GUIDE...
Page 18
oPeRaTInG InsTRUCTIons 2- and 3-Hand Models Crown Seconds Hand Seconds hand Date Display Crown pushed against case Rotate crown in either direction Time setting Pull crown to position 2. To set time rotate crown in either direction. Date setting Pull crown to position 1. To set date rotate crown in either direction. oPeRaTInG InsTRUCTIons Convertible bracelet/strap Models Digital models...
oPeRaTInG InsTRUCTIons Multi-eye Models Day hand Crown Date hand Day counter Date hand Second hand 24-Hour time hand Date counter Second hand 24 hours counter Time setting Multi-eye watches are powered by multi-function movements that enable them to report such information as month, weekday and date via apertures or “eyes”...
Page 20
Converting Bracelet to Strap Light /Reset (A Key) Mode (B Key) B Key –> Real Time Time setting 1. At any state, press A key EL backlight for 3s. 2. Chronograph Press D key to Start/Stop running; When stop, press C key to zero. When running, press C key to split count.
Need help?
Do you have a question about the 1512323 and is the answer not in the manual?
Questions and answers