Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for LandStal GRASSER 300
- Page 1 WARRANTY CARD USER’S MANUAL English version...
-
Page 2: Table Of Contents
CONTENT Section 1. INTRODUCTION PURPOSE Section 2. 2.1. INTENDED USE Section 3. OPERATIONAL SAFETY 3.1. General safety regulations 3.2. Maintenance 3.3. Transport on public roads 3.4. Safety signs Section 4. CULTIVATOR DESIGN 4.1. Cultivator technical characteristics HANDLING AND USE Section 5. 5.1. -
Page 3: Introduction
If you see this SIGN, beware of danger and carefully read the appropriate information and inform other operators. REMEMBER - LANDSTAL assumes no liability for damage resulting from failing to follow the user’s manual. In case of any problems or doubts associated with service and use, please contact the authorized dealer or the Manufacturer's Sales Department. -
Page 4: Purpose
The dealer is obliged to enter the warranty service provider's address into the warranty certificate. The plant continuously improves its products and therefore it reserves the right to make construction and technological modifications and equipment changes. INDICATIONS Orders defined by the following words: WARNING, CAUTION, REMEMBER are used to emphasize importance of the information. -
Page 5: Intended Use
The manufacturer is not liable for unauthorized changes in cultivator design. During the warranty period, only the factory parts of LANDSTAL should be used REMEMBER – The cultivator is designed exclusively for agricultural work. Using it for purposes other than those specified in point 2 will be understood as a misuse. -
Page 6: Maintenance
The cultivator (grasser + tractor) should be handled with all precautions and in particular: before each start-up, inspect the cultivator and the tractor: if they are in appropriate conditions which guarantee safety during transport and operation the cooperating tractor must be equipped with front axle weights. Balance the tractor with the mounted cultivator, its steerability and braking function must be maintained;... -
Page 7: Transport On Public Roads
2. For handling, use operational tools and instruments as well as original materials and parts. 3. To protect all bolts included in the cultivator, use typical protections and safety pins. You must not use substitute protections, such as: bolts, rods, wires, etc., which during operation or transport may cause damage to the tractor or cultivator, thus posing a threat to safety of other road users. -
Page 8: Safety Signs
3.3 SAFETY SIGNS Table 1 Please read the user’s Stop the tractor engine and manual before you start remove the key from the handling the machine ! ignition before starting maintenance and repairs Failing to follow instructions contained in this manual may void the warranty. -
Page 9: Cultivator Design
Section 4. GRASSER CULTIVATOR DESIGN It consists of the following unit assemblies and sub-assemblies marked on the photo below . Figure 1 Figure 1. GRASSER CULTIVATOR 1. Main frame, welded construction. 2. Couplers for mounting the machine. 3. Working elements. 4. -
Page 10: Handling And Use
4.1 TECHNICAL CHARACTERISTICS OF GRASSER TABLE 2 Cultivator type Unit Parameters Measures GRASSER Cultivator type Mounted/Semimounted Model Working width Number of springs sections Cambridge roller (standard) Roller type Prizmatic roller (option) Transport width Max. working depth Surfactant <0,05 Transport speed km/h Working speed km/h... -
Page 11: Attaching Cultivator To Tractor
• Check that the quick connectors of the cultivator hydraulic hoses match the sockets in the tractor. If they do not fit, put them properly, • Lubricate the cultivator in accordance with the instructions provided in point 5.6. The suspended cultivator is adapted to cooperate with the tractor using the three- point suspension system. -
Page 12: Adjustment Of Cultivator
5.4 ADJUSTMENT OF CULTIVATOR 5.4.1. Adjustment of working depth You can adjust working depth by adjusting height of the springs (see reference 1). Rysunek 2 1. Adjustment of cultivator height 1.1 Adjustment with the use of bolt. 2. Adjustment of bumper height. 2.1 Adjustment with the use of bolt. -
Page 13: Work With Cultivator
5.5 WORK WITH CULTIVATOR Before starting work in the field with the GRASSER cultivator: • Dismantle warning signs (including screwed handles) used for transport on public roads, • unlock hydraulic cylinders for unfolding of the machine. • Lower a tractor jack and leave it in the floating position. If during operation the cultivator gets clogged with excessive amounts of plant debris, it should be cleaned by lifting the tractor hydraulic lifting jack for a moment. -
Page 14: Lubrication
5.7 LUBRICATION Durability and efficiency of the cultivator depends largely on systematic lubrication. Use mineral lubricants for lubrication. Lubricate in accordance with the following photos Figure 4 Figure 4 Lubrication points for the GRASSER cultivator. 1. ROLLER BEARING - LUBRICATE EVERY 20 WORKING HOURS. 2. -
Page 15: Maintenance And Storage
5.8 MAINTENANCE AND STORAGE In order to maintain the optimal properties of the machine, please: ● Check and tighten all bolts if necessary, ● Inspect technical conditions of the machine CLEANING: ● Do not use high-pressure washing within bearings and hydraulic hoses, ●... -
Page 16: Warranty Exclusions
Warranty commitments: if parts have become useless due to material defects, constructional or manufacturing errors, which has been sufficiently documented, they are repaired by our company or after their free transfer to our plant. The research department of our plant is responsible for documenting defects –... -
Page 17: Identification Details
IDENTIFICATION DETAILS The cultivator details are placed on the identification plate, which is mounted on the main frame of the cultivator. Figure 5 An exemplary photo of an identification plate WARRANTY CERTIFICATE Supply (dealer) of the cultivator 1. Company name………………………………………………………………………………………………… 2. - Page 18 Date, stamp and signature No. The scope of repair and replaced parts repairing entity 18 | P a g e...
- Page 19 UE Declaration of Conformity LANDSTAL Bartnik, Witkowski Spółka Jawna I hereby declare with full responsibility that our product: grasser cultivator, complies with the Directive of the European Parliament and Council 2006/42/WE GRASSER To meet the requirements of the Machinery Directive:...
Need help?
Do you have a question about the GRASSER 300 and is the answer not in the manual?
Questions and answers