YurVision YV19WB3 Quick Start Manual

Safety Precautions and Maintenance
1 Unplug the monitor before cleaning it with a slightly damp cloth.
2 Wiping the screen with a dry cloth is recommendable, and only during the
power has been switched off.
3 Do not use alcohol or ammonia-based liquids.
4 This monitor is designed with ventilation holes on the cabinet back, please
do not cover them or block it.
5 Also avoid placing the monitor near the electric heater or heater, including
in an enclosed room with no ventilations.
6 Please do not insert any matter or spray any liquid on it.
7 Please do not position the monitor on unsafe space, if it falls, it may be
damaged and may hurt the user.
8 Unplug the monitor if it is not going to be in use for an extended period of
time.
9 Please do not put heavy items on the monitor, or electric cord.
10 Please do not open the monitor back panel because the monitor contained
high voltage current.
Contents

A signal cord

A power cable

A warranty card

A user manual please down load from HKC web-site, or mail request it
 An audio cable(option)

A DVI cable(option)
All specifications and information are subject to changes without further notice
Features:

16.7M high quality image colors
Smart image screen setting – OSD with simple layout and easy selection


Smart control interfaces for easy settings
Basic setup
Insert the VGA cable (signal cord) to the PC graphic card (signal input).
a)
The monitor has a wide power voltage range; it can be used on AC 100-240
b)
50/60Hz power supply.
Connect the power cable to the Monitor power socket and to the power source
c)
in the room.
Turn on the power source supply.
d)
To switch on the monitor, press the power control on/off key
e)
All specifications and information are subject to changes without further notice