Page 5
Assembly Instructions Press the casters on the base. Notice: Keep Gas Lift away from your clothes. Oil on its surface may transfer.
Page 6
Assembly Instructions Place the Seat Cushion (7) on the Gas Lift (3). Sit on the seat and use the seat height adjustment knob to raise and lower the seat completely 3 times. Attach the armrests (4) to the seat (7) and screw in place. Take care to attach each armrest to the correct side of...
Page 7
Assembly Instructions Connect the backrest (6) to the seat (7) and use the Allen Wrench (9) to tighten screws in place. If there is no headrest, put the cover (12) assembly now. Headrest Use the ÒLÓ Allen Wr e nch (10) to screw the headrest onto the backrest .
Page 11
Assembly Instructions Press the casters on the base. Notice: Keep Gas Lift away from your clothes. Oil on its surface may transfer.
Page 12
Assembly Instructions Place the Seat Cushion (7) on the Gas Lift (3). Sit on the seat and use the seat height adjustment paddle to raise and lower the seat completely 3 times. Attach the armrests (4) to the seat (7) and screw in place. Left R ight Take care to attach...
Page 13
Assembly Instructions Connect the backrest (6) to the seat (7) and use the Allen Wrench (9) to tighten screws in place. If there is no headrest, put the cover (12) assembly now. Headrest Use the ÒLÓ Allen Wre nch (10) to screw the headrest onto the backrest.
Page 14
Adjustment Mechanisms 1. Headrest Height and Angle 2. Tilt Lock 3. SciFloat 4. Seat Height 5. Seat Depth 6. Arm Height, Width, Depth, and Angle 7. Dynamic Variable Lumbar (DVL) Support 8. Backrest Height...
Page 16
Headrest Height Adjustment Hold the headrest handles and push up or down to adjust the height. There is a 2.75" vertical range of motion. Your headrest is positioned to provide ergonomic support when it makes full contact with the back of your head and neck.
Backrest Height Adjustment Grasp the bottom of the backrest and pull it up to adjust the height. To lower the backrest, raise it to the highest setting then release. There are 4 lock positions with a range of 3Ó. We recommend keeping the backrest at a height where the lumbar support is resting in the natural curve of your low back.
Seat Height Adjustment Setting your seat to an incorrect height can lead to back fatigue. At an ideal height your are at a 90 degree angle. Press upwards on the Height Adjustment Lever located on the knob on the right side of the chair.
Seat Depth Adjustment The seat is ideally positioned when you can seat and the back of your knee. The Seat Depth Adjustment Lever is located on the knob on the left side of the chair. Lift the lever and slide the seat to your desired position.
Page 20
SciFloat Infinite Recline ™ To change the amount of resistance you feel as you lean back, turn the SciFloatª side of the chair. Turn forward to increase the tension, turn backward to reduce. Adjust the tension to what feels comfort- able for you.
Page 24
Assembly Instructions AdjustmenT Guide for www.xchair.com...