Precision Consumer Products FL 7SQ 345CCT BZ 120V User Manual

7"/10" Color Changing LED
Flood Lights User's Guide
Read All Instructions. SAVE THESE INSTRUCTIONS

CARE AND MAINTENANCE

C
aution: Before attempting to clean, service or troubleshoot the fixture, disconnect
the power to the fixture by turning the breaker off or removing the fuse from the fuse
box.
This LED light fixture is made from quality materials that will last many years with minimum
care and maintenance. You may want to clean the fixture with a soft cloth periodically.
To maintain the best appearance of the fixture, do not use cleaners with chemicals,
solvents or harsh abrasives. Do not use liquid cleaner on the LEDs, LED driver, or wiring
inside the light fixture.

TROUBLE SHOOTING

PROBLEM POSSIBLE CAUSE
A. Fixture not properly
Light will not come A. Check wires to ensure proper connections.
connected.
B. Check to make sure breaker is on and test
on.
B. Fixture not receiving another working electrical device to make
sure it is receiving power.
power.
*FCC WARNING:
WARNING: Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user authority to operate the equipment.
NOTES: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy, and if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Precision Consumer
Products Group, LLC.
11024 Balboa Boulevard • Suite 1710 Granada Hills CA 91344
1-866-237-9983
www.precisioncpg.com
SOLUTION
Model:
FL 7SQ 345CCT BZ 120V
FL 10SQ 345CCT BZ 120V
Over