Advertisement
Decorative Lighting – Spacing Matching Series
China Factory: Block 5, Lianjian Science &
Technology lndustrial Park, Crossing of Huarong
Road, Dalang Sub-District, Longhua, ShenZhen
City, Guangdong, China
Tel: (86) 755 2344 6211
Fax: (86) 755 8601 9193
User Manual
HK Office: Unit 1901, 19
No. 57 Hung To Road, Kwun Tong, Kowloon,
Hong Kong
Tel: (852) 3152 3059
Fax: (852) 3152 3039
th
Floor, NanYang Plaza,
Advertisement
Table of Contents
Summary of Contents for Dilux AP2114B
- Page 1 User Manual Decorative Lighting – Spacing Matching Series China Factory: Block 5, Lianjian Science & HK Office: Unit 1901, 19 Floor, NanYang Plaza, Technology lndustrial Park, Crossing of Huarong No. 57 Hung To Road, Kwun Tong, Kowloon, Road, Dalang Sub-District, Longhua, ShenZhen Hong Kong City, Guangdong, China Tel: (852) 3152 3059...
- Page 2 Contents I. Installation Guide AP2114B/AP1709B/AP1709C/AP1720（New item） /AP1714/AP1612B/AP1807/AP1804/AP1506 /AP1013 Installation guide ① Surface Mounted Installation ② Trimles Recessed Installation 2. AP5712C Installation guide ① Trim Recessed Installation II. Cutting Instruction III. Precautions (Storage, Warranty, Frequently Asked Questions)
- Page 3 Installation Guide (AP2114B/AP1709B/AP1709C/AP1720（New item) AP1714/AP1612B/AP1807/AP1804/AP1506/AP1013) Surface Mounted 1. Attach strip light at the center of the inner 2. Connect the cable and install the two end caps. bottom of aluminum profile. 4. First determine the installation position, make sure 3. Cover the PC cover on the profile.
- Page 4 Installation Guide （ AP1709B/AP1709C/AP1720（New item）/AP1714/AP1612B/AP1807/AP1804/AP1506/AP1013 ） Trimless Recessed 1. Attach strip light at the center of the inner 2. Install the front-end cap and PC cover. bottom of aluminum profile. 3. Slot the place where the profile need to be 4.
- Page 5 Installation Guide （AP2507B） Trim Recessed 1. Attach strip light at the center of the inner 2. Install the front-end cap and PC cover. bottom of aluminum profile. Slot the place where the profile need to be 4. Apply glass glue on both sides of the groove installed.
- Page 6 Cutting Instruction According to the length of the multiple of the strip light minimum cutting unit, measure the aluminum profile and mark the area need to be cut, and the cutting blade is biased toward the portion to be cut. 2.
- Page 7 Precautions Use Maintenance During the installation, ensure the wire is connected properly base on the marking of the wire end and the electricity operation is prohibited. Electronic components such as power supplies are strictly prohibited from being disassembled; The lighting fixture should be wiped and maintained regularly. It is recommended to maintain once or twice a quarter.
- Page 8 Frequently Asked Questions Q: Some parts of the linear light are not bright? A: If it is not bright in some parts, there should be defect of LED chip of the LED strip. It is recommended to replace the defected LED strip.
Need help?
Do you have a question about the AP2114B and is the answer not in the manual?
Questions and answers