Summary of Contents for Healthe Air
- Page 1 Healthe Air User Guide formerly Cleanse Troffer Air Sanitizing Retrofit Troffer...
-
Page 2: Packing List
3. Open and remove existing troffer wiring compartment cover. Fig. 7 Healthe Inc. | 3905 W Eau Gallie blvd, Suite 101, Melbourne, FL 32941 | 877.999.5742 | healtheinc.com Healthe Inc. | 3905 W Eau Gallie blvd, Suite 101, Melbourne, FL 32941 | 877.999.5742 | healtheinc.com... - Page 3 Fig. 8b Fig. 12 Fig. 9a-Detail Healthe Inc. | 3905 W Eau Gallie blvd, Suite 101, Melbourne, FL 32941 | 877.999.5742 | healtheinc.com Healthe Inc. | 3905 W Eau Gallie blvd, Suite 101, Melbourne, FL 32941 | 877.999.5742 | healtheinc.com...
- Page 4 2. Once the App is open, apply power to the Healthe Air. 4. The visible light of the Healthe Air will flash when pairing is successful. Press any button on the switch to exit 3. Start pairing process by selecting "LINK" on the App. A scan will be performed and the "Cleanse" will appear pairing mode.
-
Page 5: Over-The-Air (Ota) Firmware Update
Tap & Hold Together: SINGLE DEVICE FIRMWARE UPDATE METHOD 1. Ensure the Healthe Air is linked and paired to your SunTrac Pro App. Please refer to “Commissioning and Setup” section for instructions. 2. Open the SunTrac Pro App and tap "LINK" to see the list of paired Healthe Air. (Fig 1) 3. - Page 6 Fig 1 Fig 2 2. Identify the two slots on the edge of the Air next to the screens. With a hand on the Air, insert a flat head screwdriver into the slot to trigger the latch release (Fig 4).
- Page 7 It is the responsibility of the installer to ensure that all materials (including existing troffer housing), hardware, and building structural members used can bear and support the weight of Healthe Air (34 lbs) and that they meet all applicable building and safety codes once installed.
Need help?
Do you have a question about the Air and is the answer not in the manual?
Questions and answers