Table of Contents
Advertisement
Quick Links
LANSO A6+ user guide
IMPORTANT
Before using your LANSO A6+ headset for the first time, you must charge it
continuously for about 8 hours, until the red indicator light turns off. Please
refer to the "Charging LANSO A6+" section of this manual.
1. Introduction
The LANSO A6+ headset is a wireless headset based on the Bluetooth ®
technology.
The Bluetooth ® technology is a standard for wireless short distance radio
communications. Devices like a headset and a mobile phone can communicate with
each other without wires within approximately 10 meters.
LANSO A6+ is a qualified Bluetooth ® headset that complies with the Bluetooth ®
1.1 protocol. It supports two profiles: Headset Profile and Hands-free profile.
It will work with any qualified Bluetooth ® device that supports the Headset profile or
the Hands-free profile.
Your LANSO A6+ will allow you to take a call, initiate a call (if your phone has voice
controls), and adjust volume directly on your headset, without the need to touch your
mobile phone.
The LANSO A6+ headset has 3 buttons:
• "TALK "Button (central button),
•
1 "VOL+ "button,
• 1 "VOL- "button.
Please refer to the picture on page 2.
Before using LANSO A6+ headset, you must:
. Charge the headset; please refer to the "Charging LANSO A6+" section of this user
guide.
. Pair the headset with a mobile phone. Please refer to the "Pairing LANSO A6+"
section of this manual.
PAGE 1 / 6
Advertisement
Table of Contents
Summary of Contents for Lanso A6+
- Page 1 It will work with any qualified Bluetooth ® device that supports the Headset profile or the Hands-free profile. Your LANSO A6+ will allow you to take a call, initiate a call (if your phone has voice controls), and adjust volume directly on your headset, without the need to touch your mobile phone.
- Page 2 Ear clamp Charging socket VOL+ button VOL- button speaker TALK button Indicator light Microphone PAGE 2 / 6...
- Page 3 Do not let the battery charger remain plugged in the headset for more than 24h. 2. Pairing LANSO A6+ Before using the LANSO A6+ headset, you must pair it with your Bluetooth ® mobile phone. Pairing is the process of linking 2 Bluetooth ® devices, so that they can communicate.
- Page 4 Press and hold the TALK button for about 2 seconds until the green indicator light is on. A beep (2 tones) can be heard in the speaker. Release the TALK Button. If LANSO A6+ is paired in the Hands Free profile, it will try to connect automatically to the paired Audio Gateway (e.g. mobile phone).
- Page 5 Mobile without voice recognition . Make sure both the headset and the mobile phone are ON and in stand-by mode. . Dial the phone number you wish to call on your mobile phone. . After roughly 2 seconds, the audio connection is established. 6.
- Page 6 However, an incoming Call on any phone (primary or secondary) will be sent to your LANSO A6+ headset, and it can be answered on the headset (if LANSO A6+ has no link established with the other phone which is not receiving the latest incoming call).
Need help?
Do you have a question about the A6+ and is the answer not in the manual?
Questions and answers