Summary of Contents for R-Co Kingsman Marquis Proflame 2
- Page 1 - Proflame 2 Wifi Dongle Instructions – A Division of R-Co. Inc. 2340 Logan Ave. Winnipeg, Manitoba Canada R2R 2V3 Ph.: (204) 632-1962 Printed in Canada September 25, 2020 Part# P2W-MAN...
-
Page 3: Table Of Contents
Table of Contents Table of Contents……………………………………………………………............Introduction: Proflame 2 WiFi Dongle Hardware, Proflame Connect Application………………………………. Step One: Download Proflame Connect App………………………………………………………………………. Step Two: Install WiFi Dongle……………………………………………………………………………………….. Step Three: Configure the Fireplace………………………………………………………………………………… To Configure a Fireplace with the iOS App…………………………………………………………………………. To Configure a Fireplace with the Android App…………………………………………………………………….. Searching for New Fireplaces…………………………………………………………………………………………... -
Page 4: Introduction: Proflame 2 Wifi Dongle Hardware, Proflame Connect Application
Introduction Proflame 2 WiFi Dongle Hardware Supplied with Fireplace WIFI-READY PROFLAME 2 MODULE (584.665) WIFI DONGLE (584.526) CABLE PART NUMBER: RCP2WIFI WALL MOUNT REMOTE CONTROL (584.090) Proflame 2 WiFi Dongle The Proflame 2 Wi-Fi Dongle will connect to an existing WiFi network and create a standalone WiFi network with a dedicated access point. -
Page 5: Step One: Download Proflame Connect App
WiFi Dongle Installation Step One: Download Proflame Connect App. Search for the Proflame Connect app in either the Google Play Store or the Apple App Store, and download it. Your phone must be connected to the WiFi network you wish the WiFi Dongle to use before your fireplace can be configured. -
Page 6: Step Three: Configure The Fireplace
Step Three: Configure the Fireplace Ensure that Green and Red LED lights are on before configuring Fireplace. a) Restore power to the Proflame 2 Module. b) Pair the Wall Mount Remote Control (584.090) supplied with your fireplace, if not already done. c) Once the WiFi Dongle is connected to the Proflame 2 Module and power is restored, two LED lights, one Green and one Red will light on either side of the wire connector. -
Page 7: To Configure A Fireplace With The Android App
If you wish to use your Fireplace with a Virtual Assistant, enter the paring key that you received by email. To get the key to use voice commands you must register your device on the registration web page. If you don’t want to use voice commands, leave the field blank and press Next. -
Page 8: Searching For New Fireplaces
Searching for New Fireplaces Once a fireplace has been configured, the Proflame Connect app will be able to add it to your list of fireplaces by searching for it. The application will scan You will now be able to the local network and view and change settings Select “Manage Devices”... -
Page 9: Using The Proflame Connect App
Using the Proflame Connect App The Wall Mount Remote Control (584.090) supplied with the fireplace must be present and functioning for the Proflame Connect app to work. The Main Menu is located at the upper left corner of the main page. Main Menu icons: Main Menu Manage Devices –... -
Page 10: Wifi Dongle Locations
WiFi Dongle Locations Once the WiFi Dongle is configured and working correctly use the supplied Velcro adhesive to set in the appropriate location within the fireplace as shown below. Proflame 2 Box – Used in Kingsman and Marquis Fireplaces Proflame 2 Box – Enclave Series Units – Top View Proflame 2 Box –...
Need help?
Do you have a question about the Kingsman Marquis Proflame 2 and is the answer not in the manual?
Questions and answers