Contents Introduction................................1 Features of the Motion Adjustable Bed ......................1 Quick Set-Up Guide ..............................2 Power Cord Set Up ..............................4 Joining Two Twin XL Adjustable Bases ......................5 Mattress Retainer Bars ............................6 Mattress Retainer Bar Diagram ........................7 Remote Control Features ............................
Introduction Thank you for purchasing a Motion Adjustable Bed from Blissful Nights. We are confident that you will enjoy your new adjustable bed for years to come. If you have any questions with regards to your new adjustable bed, please don’t hesitate to contact us at 800-723-0316.
Quick Set-Up Guide The adjustable base is delivered as a complete unit. The only loose items in the box should be the following: 1 Wired Remote Control 4 – 7 ½” Legs Power Cord (3 Pieces – Motor Power Cable, AC/DC Power Adapter and Power Cord Plug) ...
Page 5
Step 6: CAREFULLY turn the adjustable base over and place the adjustable base on all 4 legs (this may take two people to do this) and plug the bed into a power outlet or surge protector. Step 7: Install the mattress retainer bars, refer to the instructions for the Mattress Retainer Bar on Page 7. Step 8: Test the bed by pressing the Head and Feet “Up”...
Joining Two Twin XL Adjustable Bases If a split setup is being installed, metal connector brackets are provided (one per base) to secure the bases together. The brackets connect the bases together at the leg. To install the connector brackets, remove the star knobs from the connecter bracket and slip the threaded bolt of the legs through the desired hole in the connector bracket before screwing the legs into the bed base.
Mattress Retainer Bars To install the mattress retainer bar: 1. Locate the chrome mattress retainer bar(s) in the packaging. 2. Underneath the foot of the base, there are two brackets to insert the mattress retainer bar. Slide the large retainer bar into the brackets at the foot of the bed and small retainer bars into the side brackets on the side of the bed.
Remote Control Features The Motion Adjustable Bed remote control includes the following functions: This button will make the Head actuator go up This button will make the Foot actuator go up This button will make the Head actuator go down This button will make the Foot actuator go down These buttons, when held together at the same time, will make the Head &...
Test All Functions To ensure proper set up, use the remote control and test all of the functions for 3 seconds. □ Head Raises □ Foot Raises □ Flat Position...
Weight Recommendations and Limits The recommended weight restriction for the Motion Adjustable Bed is 700 pounds, which is calculated to include the weight of the mattress. In order to calculate the weight limit subtract the weight of the mattress from 700 pounds. The bed will support the recommended weight limits if distributed evenly across the base.
Remove any obstructions away from the head and foot mechanisms and return the base to its flat position. If you have any questions regarding this product or if you need assistance with set up and troubleshooting, please call Blissful Nights Customer Service: 1-800-723-0316.
Need help?
Do you have a question about the M-1000 and is the answer not in the manual?
Questions and answers