TUF-TUG Products TT1-8W Operating Instructions

OPERATING INSTRUCTIONS
TO APPLY TENSION, engage the drive lever
by pushing the black plastic covered spring,
located on the handle, rearward, and
pivoting the handle back and forth.
TO RELEASE TENSION, disengage the
drive lever by pushing the black plastic
covered spring, located on the handle,
forward, pivot the handle forward until
the stop lever is contacted, continue to
apply pressure against the stop lever until
it releases and allow the handle to pivot
backward. Repeat this procedure to release
the load a notch-at-a-time.
TO FREEWHEEL SPOOL, release all of the
line tension, manually disengage the stop
lever by pulling back on the exposed wire
loop and unreel the desired length of cable.
For more information on this product or our other Hoist/Pullers,
Blocks, Pulleys, Fence Installation Accessories or Safety Equipment...
Please Contact:
TUF-TUG Products
3434 Encrete Lane, Moraine, Ohio 45439
(937) 299-1213 • Fax (937) 299-0120
P R O D U C T S
WEB-STRAP HOIST/PULLER
TT1-8W
• 1,000 Lb. Lift Capacity
• 2,000 Lb. Pull Capacity
• 8 Foot Reach Capability
• 1 Inch Wide Webbing With
Red Safety Warning Cores
• Double Strength
Dual Drive
• 1/4 Inch Alloy
Hooks
3434 Encrete Lane, Moraine, Ohio 45439
(937) 299-1213 •
TUF-TUG Products
(937) 299-0120
Fax
TT1-8W 4/15/2020