Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for norelem 21010
- Page 1 GUIDE RAILS SERVICE INSTRUCTIONS...
-
Page 2: Table Of Contents
Summary Introduction Overview of the norelem range Safety regulations and security notice Using the guide rails Bill of materials Using and connecting accessories Geometric tolerances Care and maintenance Lubrication Adjusting the slide guide Services 2 / 12 © norelem © norelem www.norelem.co.uk... -
Page 3: Introduction
Whether for metrology equipment construction, or in the optical industry, or for maintenance, milling or even the creation of special machinery, norelem guide rails provide you with a versatile, qualitative and high-precision solution that can be adapted to all your needs. -
Page 4: Safety Regulations And Security Notice
When disassembling the rails, be sure to re-adjust the clearance 4. Using the guide rails 4.1 Bill of materials Integrated modular grid Planed faces End plate Micrometric adjustment screw Grease nipple 4 / 12 © norelem © norelem www.norelem.co.uk www.norelem.fr... -
Page 5: Using And Connecting Accessories
The movement rail following the Y axis is positioned above the first rail. To assemble the two rails, unscrew the two fastening screws of rail Y, and move the slide back to reveal the counterbores. Fastening screw Counterbores visible 5 / 12 5 / 12 © norelem © norelem www.norelem.co.uk www.norelem.fr... - Page 6 Insert the centring bushes in the through holes of the modular grid to achieve precise positioning Fix the two rails using a fastening screw. Centring bush Fastening screw Restore the rail along the Y axis to its original state. Remember to re-adjust the clearance if necessary. 6 / 12 © norelem © norelem www.norelem.co.uk www.norelem.fr...
- Page 7 Attach a mounting bracket to the rail to create a Z axis. Mounting bracket Perform the same operations as described in Step 4 to attach the Z axis to the X and Y axes. Centring bush Fastening screw 7 / 12 © norelem © norelem www.norelem.co.uk www.norelem.fr...
- Page 8 4. Using the guide rails 4.2 Using and connecting accessories Example of a displacement assembly on the X, Y and Z axes. 8 / 12 © norelem © norelem www.norelem.co.uk www.norelem.fr...
-
Page 9: Geometric Tolerances
Guide rail with dovetail mount, aluminium Deviations in µm Length of the slide in mm L<100 100<L<200 200<L Roller-mounted high-precision guide rail, cast iron Deviations in µm Length of the slide in mm L<100 100<L<200 200<L 9 / 12 © norelem © norelem www.norelem.co.uk www.norelem.fr... -
Page 10: Care And Maintenance
Vactra No. 2 (original). 5.2 Adjusting the slide guide After a certain period of use, or after reassembly of the norelem guide rails, it may be necessary to adjust the slide guide. In the case of both dovetail guide rails and roller bearing rails, the slide guide is adjusted using the setscrews on the side of the rail. -
Page 11: Services
Technical support listening to all your questions, ■ giving advice and assisting you in making decisions. Fast and simple implemention ■ of your ideas with our free CAD-data. 11 / 12 11 / 12 © norelem © norelem www.norelem.co.uk www.norelem.fr... - Page 12 www.norelem.co.uk...