Advertisement
Available languages
Available languages
Notesco
4 (4)
Note: Make sure the radio path is clear of obstructions. Antennas should be installed where they can
"see" each other as much as possible. Make sure the antennas are high enough.
Make sure the antennas are pointing to each other, and preferably on the same level plane.
Note: When communicating with Omni antenna, always install Yagis in vertical polarisation
("pins" up/down).
Note also that radiation pattern around high gain Omni antenna may be very narrow (7° only in a
12 dBi Omni antenna) so antennas installed higher or lower than Omni antenna's center level plane
may not work even though they point to correct direction.
Notesco Oy
Haapatie 16 00780 Helsinki
Y-tunnus 1754433-8
Advertisement
