Download Print this page

Advertisement

Quick Links

P4K
THE HIGHEST QUALITY FULL NDI
®
CAMERA ON THE PLANET.
USER GUIDE
PART 2: NDI
INSTRUCTIONS
®

Advertisement

loading
Need help?

Need help?

Do you have a question about the Birddog P4K and is the answer not in the manual?

Questions and answers

Summary of Contents for NDI Birddog P4K

  • Page 1 THE HIGHEST QUALITY FULL NDI ® CAMERA ON THE PLANET. USER GUIDE PART 2: NDI INSTRUCTIONS ®...
  • Page 2 WELCOME TO THE FUTURE.
  • Page 3: Password Management

    4. PoE+ (Power over Ethernet) 8. PT Max Speed 4. DC 8. OSD 4. Thermal management 9. SYSTEM 5. BOOTING UP YOUR BIRDDOG P4K 9. System update 5. Indication of system boot process 9. NDI NETWORK SETTINGS 5. OPERATING P4K 9. Transmit Preferred Method 5.
  • Page 4: Audio In/Out

    Getting to know your P4K Thanks for purchasing BirdDog P4K. Please take some time to read this document to allow you to get the most out of your purchase and familiarize yourself with the features available in the unit. Physical connectors...
  • Page 5 NDI compatible devices on the SAME ethernet subnet. Indication of system boot process As soon as BirdDog P4K detects a power input signal the 'power/fault' light will light up green. For further networking architecture instructions including routing please consult either your system administrator or On the ethernet/NDI connector on the rear.
  • Page 6 Password management Once you direct your web browser to the web configuration panel you will need to log in to change any settings. Enter Password It is recommended to change this password in a network Default password The web configuration panel is secured by a user-selectable environment where P4K is shared with other users (e.g.
  • Page 7 NDI Encode Bitrate management Onboard Tally BirdDog P4K allows you to interact with the video bitrate P4K comes equipmed with a 360 degree tally system that the NDI encode engine produces. This can have drama- allowing you to see a tally light from any angle of the tic effects on image quality and network traffic.
  • Page 8 OSD. Settings The P4K communicates with the camera head via a serial The OSD is visible on both the NDI output and SDI/HDMI interface, these settings should remain as per default: and can equally be accessed via the included remote VISCA ADDRESS: 1 control.
  • Page 9 In the past in order to NDI NETWORK SETTINGS send NDI video over a WAN the UDP transport was the only option available. UDP solved some issues of WAN applica- Transmit Preferred Method...
  • Page 10 You can name each unit with a friendly name that makes sense for each production (Camera 1, Camera 2, etc). This name will appear on any NDI receiver when it looks for DHCP IP address DHCP is set as the network configuration by default for video coming from Mini over the network.
  • Page 11 bird-dog.tv hello@bird-dog.tv...