munisense NP2 Quick Start Manual
  1. Manuals
  2. Brands
  3. munisense Manuals
  4. Measuring Instruments
  5. NP2
  6. Quick start manual

munisense NP2 Quick Start Manual

Hide thumbs
1
2
3

Advertisement

Table of Contents

NP2 Quickstart Guide

Contents of the box

• NP2 meter
• 230V adapter
• Weather protector and windscreen
• Pole mountingplate

First use instructions

1. Unscrew the four screws on the lid of the NP2 and take the lid off.
NP2 QuickStart Guide 1v0
for more information, see:
munisense.com/support
Page 1 of 3

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NP2 and is the answer not in the manual?

Questions and answers

Summary of Contents for munisense NP2

  • Page 1 • NP2 meter • 230V adapter • Weather protector and windscreen • Pole mountingplate First use instructions 1. Unscrew the four screws on the lid of the NP2 and take the lid off. NP2 QuickStart Guide 1v0 Page 1 of 3...
  • Page 2 4. Screw the lid back on. Attach the mounting plate and place the gateway on the required location with the antenna facing down. Connect the 24v power supply, battery pack or a solar panel. An empty NP2 will charge in 4 hours to around 90%. LED Indicators...
  • Page 3 On start-up a flashing RED LED indicates charging. The gateway will boot when the battery has enough charge. Note: for an empty battery this will take around 20 minutes. The power LED indicator will turn off 5 minutes after the gateway starts. NP2 QuickStart Guide 1v0 Page 3 of 3...

Table of Contents