Advertisement
INSTRUCTIONS
Prior to first use, please insert the electrical cord into a standard outlet. If your machine has
been shipped overseas, it will have a transformer to accommodate the voltage required.
Please follow the steps below to use the machine:
-
Open the cabinet doors by unlocking the black knobs at the top and bottom of the
cabinet
-
Place the equipment on the shelves
o Larger items should be on
higher shelves to allow
ozone to circulate
throughout the cabinet
o For best results, take the
equipment apart as much as
possible (ex: remove all
Velcro from pads, remove
insoles from boots or skates
and place them as separate
items in the machine).
o Do not place items on top of
each other
o For best results, the
equipment should be dry
-
Once all items are placed properly in the cabinet, the operator should close and lock the
doors using the black knobs at the top and bottom of the cabinet
-
Turn the power on by pressing the dial
-
The green circles around the cycle button signify that the machine is ready for use
-
Press the cycle button to start the 12 minute process
-
Red dots will appear and then begin to disappear in a circular fashion indicating the time
remaining for that portion of the cycle. The first part of the cycle is generating purified
air through Fan 1. This lasts 3 minutes.
-
There will then be 20 seconds of red circles going in opposite directions. This signifies
the change from Fan 1 to Fan 2.
-
Fan 2 will then have a 3 minute cycle of generating purified air. This will be shown as red
dots disappearing as was the case with Fan 1.
-
Yellow dots will now appear to count down the ozone destruction / waiting period. This
phase lasts 6 minutes.
-
Green dots will follow the yellow dots to announce that the cycle is complete and the
equipment can be removed.
Toll free: 1-877-262-5801, Tel: 514-382-1140, Fax: 514-382-8249, email: marketing@sanisport.ca
510 Hodge, St-Laurent, QC H4N 2A4
Advertisement
