Advertisement
Manual
Content
Structure..............................................P1
Specifications.....................................P2
Lock Install...........................................P4
Issue cards...........................................P5
Basic action.........................................P6
Maintenance......................................P7
Advertisement
Table of Contents
Related Manuals for Xeeder stand-alone keycard lock L5118-M1
Summary of Contents for Xeeder stand-alone keycard lock L5118-M1
-
Page 1: Table Of Contents
Manual Content Structure..........P1 Specifications........P2 Mortise & Panel size......P3 Lock Install...........P4 Issue cards...........P5 Basic action.........P6 Maintenance........P7... -
Page 2: Structure
INTRODUCTION Congratulations on your selection of the XEEDER Stand-alone keycard lock. This is a solution that replace traditional key locks and carry out a modern, efficient and safe management of the rooms in family and apartment. -
Page 3: Specifications
200 MAX keycard NO limit user Card format customize in EM/Mifare 1K/IC(SLE4442) card Software XEEDER Hotel Lock System v4.2 up Require 6 sec,(normal mode, automatic locking) Unlock time Issue card on lock by Master card * on encoder via Hotel lock system... -
Page 4: Mortise&Panel Size
Cylinder install Mortise model K2S Panel L5118/5218-M1 stand-alone keycard lock *This is a standard right lever mortise. The left mortise is in reverse case. *Xeeder has other type mortise K1S/K1L/P2S *Right for the hardware configuration changes without notice is reserved. -
Page 5: Lock Install
Inner hexagon screw driver This tool is necessary while install cylinder in mortise. b’ Xeeder offer it free c’ Push and pull to open it Cylinder cover opener This tool is used to open the cylinder cover to let emergency key insert. - Page 6 Generate cards Prepare a Master card.(IC lock is similar with it) 2.Place a blank card near to the sensor window. One lock can only generate There will be a beep latch only 1 Master card. sound. retracting Any card could be select to be generated a Master card.
-
Page 7: Basic Action
Basic action On/Off PASSAGE mode Turn on Passage mode blue light flash 2..Show Master card. latch There will be a beep and blue light. retracting 3..Release back handle. 1.Place a M1 card near to 1.Shake and hold the back handle 2.Remove card and shake the the sensor window to make the latch keep retracting... -
Page 8: Maintenance
Maintenance Clean Replace battery Battery-pack TYPE-A 1.Release screws from back panel 2.Take out battery-pack (keep power connector linked) and replace new. 3.Recover Battery-pack TYPE-B Clean by dry and soft cloth. Can not clean by hard brush, You can add little machine oil sand paper or any sharp item 1.Uninstall the flank plate on cloth. - Page 9 2008 Xeeder Technology Co.,Limited. All rights reserved. 3rd Floor,Huichang building,Bantian Buji Longgang, Shenzhen,China Tel:0086-755-83663830/ Fax: 888 extension Email: sales@xeeder.com...
Need help?
Do you have a question about the stand-alone keycard lock L5118-M1 and is the answer not in the manual?
Questions and answers