TopspinPro Instructions For Assembly

The TopspinPro is a visual & kinaesthetic tennis training aid
which helps a player quickly learn the correct way to play a topspin groundstroke.
What's in the Box
Stand (tripod)
Two–Minute Assembly
1.
Insert the thin front legs of the stand into the leg holders as guided
by the internal elastic. The legs should slide in about 2 cm.
Slide the square aluminium shaft of the head unit into
2.
the top of the stand. Ensure the side with the holes is
facing up.
Adjusting ball arm dampener & increasing ball resistance
For videos on assembly, instructions, drills & tips see:
Head unit 2 x fabric
(including ball) screen panels
A
B
Green Carry Bag
3.
Insert the rods of the screen panels into the small holes in the
screen-holders.
Loop the elastics around the cleats to keep the screens
4.
in position and the fabric taut.
Adjust this nut to set the correct friction on the ball arm.
This will slow down the ball arm and reduce how much the unit moves.
However, be careful not to make it so tight that the arm no longer moves.
Loop the elastic around the locknut a couple of times if you want to
increase the resistance the ball offers the racket on impact.
topspinpro.com/instructions
Instructions for Assembly
Spares: elastic,
washers, ball
stoppers, etc.