Download Print this page

Karat 20632T-S Installation Instructions

Multi-function paper holder

BEFORE YOU BEGIN

please carefully read this installation instruction in order to

ensure proper care and assembly of this accessory.

Please keep this installation instruction for future

reference.

Prior to drilling into walls, check there are no hidden

electrical wires, cables or water supply pipes with the

aid of ar, electronic detector. If you use power tools do

not forget:

1. Wear eye protection.

2. Unplug equipment after use.

Drill

Anchor x 2

Reference Value

Our company reserves the right to change marked dimensions without prior notice.

20160902

Leveling Instrument

Screw x 2

MULTI-FUNCTION PAPER HOLDER

Screw Driver

Tape

-1-

20632T-S

Hammer

Unit: mm

Table of Contents

Do you have a question about the 20632T-S and is the answer not in the manual?

Page 1 MULTI-FUNCTION PAPER HOLDER 20632T-S BEFORE YOU BEGIN please carefully read this installation instruction in order to ensure proper care and assembly of this accessory. Please keep this installation instruction for future reference. Prior to drilling into walls, check there are no hidden electrical wires, cables or water supply pipes with the aid of ar, electronic detector.
Page 2 INSTALLATION 1. Put the product into the drilled wall. Mark 2 holes on the 2. Drill 35~40mm holes on the wall with 6mm drill bit. wall. Drll holes . 35~40mm 3. Insert anchors into wall. Put the tissue box in place and tighten the screws.
Page 3 CARING FOR YOUR PRODUCTS 1. Clean the product daily with cotton cloth. Do not use abrasive materials. 2. Do not use strong chemical detergents such as strong acid, strong alkali or phosphoric acid. 3. Avoid scratching product surface with sharp objects. Our company provides one years warranty for its drain.
Page 4 MULTI-FUNCTION PAPER HOLDER 20632T-S 1265681 Plastic anchor 1299543 Panel Ö X35mm 1299540 Escutcheon 1299541 1265673 Bracket assy 1299542 Screw Slide bar Ö 4X35mm...