1. Manuals
  2. Brands
  3. JME Manuals
  4. Drones
  5. FM4000
  6. How to connect

JME FM4000 How To Connect

How to connect rc to drone
Hide thumbs

Advertisement

Table of Contents

How to connect RC to drone

1. Open RC and drone
Waiting the remote control status indicator, the blue light is solid on and the power indicator
light is flashing（see image below） ，Indicates that the remote control is in a normal connection
state，then connect to the WIFI of RC with your mobile phone
The WIFI name of the remote control is shown on the back of the remote control. JME_RC_XXXX,
The WIFI name of this remote controller is JME_RC_017A, as shown in the image below

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FM4000 and is the answer not in the manual?

Questions and answers

Summary of Contents for JME FM4000

  • Page 1 How to connect RC to drone 1. Open RC and drone Waiting the remote control status indicator, the blue light is solid on and the power indicator light is flashing（see image below） ，Indicates that the remote control is in a normal connection state，then connect to the WIFI of RC with your mobile phone The WIFI name of the remote control is shown on the back of the remote control.
  • Page 2 Tips： If the remote control indicator blue lights flash slowing, it means than the remote control is in the state of the aircraft scanning, the phone can't search the remote WIFI, please press the upper left corner media button10 seconds (see image below), restart the remote control, after restart, the remote control indicator will solid on...
  • Page 3 2. Open J.ME FLY remote ，You can see RC SSSID and RC Password Enter setting...
  • Page 4 3. Enter drone SSID and drone password click save configuration save configuration and restart WIFI...
  • Page 5 Tips: Please remember the drone SSID in advance, For example, this drone SSID is JME_0507...
  • Page 6 4. After save configuration and restart WIFI the remote control status indicator flashing about 30 seconds，then turn green solid on, it means that the RC has connected to the drone completely.
  • Page 7 5. Keep the drone and the RC in opening state，research and connect RC WIFI in your mobile phone (see below) 6.Finally, open your JME FLY and you will find that you can control your drone with your RC.

Table of Contents