My Green Mattress My Green Platform Bed Assembly Instructions

Left leg (2) Right leg (2)
Center support leg (2)
Included with
Queen and King
Slat with pre-drilled holes (4)

Step 1. Attach legs to end boards

 Align one end board, one right leg, and one left leg
so that pockets are all facing the same direction.
 Fit the dowel pins on the end board into the pre-
drilled holes on the legs.
 Insert one wood screw into each of the four pocket
holes on the end board.
 Use a Phillips-head screwdriver to tighten each
wood screw.
 Repeat above steps using the opposite end board,
right leg and left leg.

Step 2. Attach two outside rails

 Locate an outside rail marked with a green circle.
 Position the rail such that the notches are on top and facing
in toward the middle of the bed frame.
 Insert one end of the rail into the notch on one of the legs.
 Insert a barrel nut into each of the two pre-drilled holes on
the rail.
 Insert a panhead screw into each of the two predrilled holes
on the leg. Be sure screws go through the barrel nuts in the
rail. Tighten the panhead screws by hand for now.
 Insert the opposite end of the rail into the notch on the
opposite leg.
 Insert a barrel nut into each of the two pre-drilled holes on
the rail.
 Insert a panhead screw into each of the two predrilled holes
on the leg. Be sure screws go through the barrel nuts in the
rail. Tighten the panhead screws by hand for now.
 Repeat all steps above to attach the second outside rail
marked with a green circle. Ensure that the notches in the
second outside rail are on top and facing toward the middle
of the bed frame.
Assembly Instructions
My Green Platform Bed
Watch our instructional video on our website:
mygreenmattress.com/product/my-green-platform-bed/
Parts Included
End board (2)
Outside rail (2)
C
Center rail (2)
Slat without holes
Full (26), Twin X-long/Full X-long/Queen/King (28)
Dowel pins
(pre-installed)
Twin X-long/Full/Full X-long (8)
Dowel pins
Pocket holes for wood screws
Hardware Included
Wood screw
Hex-key allen wrench (1)
Queen/King (12)
Barrel nut (24)
Panhead screw (24)
Hardware Not Included
Phillips-head screwdriver