UberFix MD Simple User Manual

Thank you for choosing Uberfix MD as your personal car doctor. Understanding
your car just got a whole lot simpler.

MAIN FUNCTIONS:

Real-time display of fuel consumption, speed, engine RPM, temperature, and
other important info to maximize utility.
Diagnostic Recorder of mileage, fuel consumption/cost, average speed, driving
distance/time, and bad driving habit alerts.
Audio Alerts on high water/coolant temperature, fatigued driving, and excessive
speed to ensure safe driving.
Vehicle Health Scans detect and keep records of hidden dangers and track the
specs of your car.
Free App: Mini OBD II offers an in-app demo mode that simulates and
demonstrates each key function.
FOLLOW THESE SIMPLE USER GUIDE INSTRUCTIONS TO GET
STARTED!
1. Plug Uberfix MD into Your Car Port
a.
Easily done in just a few minutes - anyone can do it!
No professionals needed.
Every car made since 1996 is required to have one of these ports.
Download
Today at:
Thanks again for choosing Uberfix MD, Your Personal Car Doctor.
Questions or concerns? Don't worry, we're open to feedback. Write us below.
Customer Support +1-716-330-1335 support@uberfixmd.com
2. Download the Mini OBD II app on your iOS or Android Smartphone
a.
You can download Mini OBD II by scanning the QR code on this letter, or by
searching "Mini OBD/ Mini OBD II" in your App Store or Play Store.
b. Operating System Requirements: Android 2.2 and up, iOS 7.0 and up.
3. Connect Uberfix MD to the free Mini OBD II app using Bluetooth
a.
Ensure you are connected to the internet before launching the Mini OBD II app
to register and log into your account.
b. You will be prompted to select your car's make and model before you can
Complete Registration.
c. To change your make and model, click on the top right icon to select
menu options, or swipe downwards.
d. Select Settings > Vehicle Settings and choose your car's make/model.
e.
From the menu options, select Connect to Device. Ensure your Bluetooth is on
and Uberfix MD is plugged into your car.
f.
Start your car, and select Device plugged please scan now.
g.
Scan to find your Uberfix MD, the "OBD II" device, and select Connect.
4. Determining Your Check Engine Light's Problem
a. From the home screen, select Health Scan.
b. Select Rediagnosis to perform the health scan.
c.
You may Clear Fault by clicking on the top right. However, if the problem persists,
the check engine light will appear again until the problem is fixed.
5.

Route Analysis

a.
Keep Uberfix MD plugged into your vehicle and connected to your smartphone
to collect data from your driving routes and habits.
b.
Determine sharp acceleration or braking times, along with mileage and oil
consumption.