SCOPE OF DELIVERY 1 x WS Stick oxygen analyzer 1 x Measuring hose with filter and stainless steel gas probe 1 x Transport case 1 x Charging device. Input: 100 VAC-240 VAC, 50-60 Hz, 0,25 A Output: 12 VDC, 1000 mAh, 12 VA 1 x internal Bluetooth Dongle (Bluetooth class 1, approx.
DEVICE SETUP White LED ON/OFF button flashlight Charging port LED charging in- dicator (green: charging, blue: fully charged) Gas coupling (measuring gas input) with measuring hose Holder with and gas probe, hook, edge approx. 1200 protection and anti-slip inner ring. Ergonomical aluminium case with anti-slip...
OPERATING MODE To turn on the device, press the button for 3 seconds. ON/OFF button When turned on, the device will transmit an acoustic signal and show a home screen (seen to the right) for 3 seconds. This screen displays serial number, software version and signal ppm.
Page 7
Once the inspection is finished, press the ON/OFF button for approx. 2 sec. to turn the flashlight off. Turning off the WS Stick Press the button for approx. 3 sec. An acoustic signal sounds and the device is powered down.
TECHNICAL DATA Dimension without case: Tube diameter 56 mm, length 280 mm Dimension with case: 310 mm x 390 mm x 100 mm Weight without case: 0,5 kg Weight with case: 1,9 kg Power supply: Input: 100 VAC-240 VAC, 50-60 Hz, 0,25 A. Output: 12 VDC, 1000 mAh, 12 VA Measuring performance: Measuring hose with filter and stainless steel gas...
Need help?
Do you have a question about the WS STICK and is the answer not in the manual?
Questions and answers