Table of Contents
Advertisement
Quick Links
AVATUS 2-User Mode
Quick Start Guide
Introduction
In this document you will find all the information to properly configure and make use of the multi-
user operation with an AVATUS console.
Table of Contents
-
Setup
-
-
Setup
Go to: SYSTEM > PREFS > USER 1/2 > SURFACE/STRIPS
Tap on the last section you want to assign to USER 1, the remaining sections will be assigned to USER
2. To go back to Single user mode, tap on the last section (85-96). The current active mode will be
displayed on top.
Note: The settings for single user / two users apply systemwide to all projects but are not saved
within a project.
Last edited on Wednesday, 20 May 2020
1
Advertisement
Table of Contents
Related Manuals for Stagetec AVATUS 2
Summary of Contents for Stagetec AVATUS 2
- Page 1 AVATUS 2-User Mode Quick Start Guide Introduction In this document you will find all the information to properly configure and make use of the multi- user operation with an AVATUS console. Table of Contents Setup Separated Controls Shared Controls Setup Go to: SYSTEM >...
- Page 2 AVATUS 2-User Mode Quick Start Guide Separated Controls Control Room CR 1 is dedicated to USER 1, CR 2 to USER 2. When opening the CR the dedicated CR page will open at default. Still both control rooms can be accessed from both users.
- Page 3 AVATUS 2-User Mode Quick Start Guide Shared Controls Channels All channels can still be accessed from both users. Cue Automation There is one automation engine. Since both users can access all audio channels and the engine works parameter based there is no advantage in having separate automations.
Need help?
Do you have a question about the AVATUS 2 and is the answer not in the manual?
Questions and answers