Summary of Contents for Jesse Luggage Slide Lock Plate
- Page 1 2) Delrin slide 2) JJ08 lock buttons 2) Cranks with stainless washers 4) 6x35mm countersink screws with special washers 1) Template / Stiffener Plate (aluminum) 1) Small Tube silicon Jesse Luggage Slide Lock Plate Install guide...
- Page 2 GREEN Pattern is used when mounting a top box to a 20" GREEN Pattern is used when mounting a top box to a 20" wide "Slide Lock Plate" The pattern plate is also used as a stiffener plate and is put...
- Page 3 Use the template, that is also used as a stiffener plate when installed between the bottom of the top box and the delrin slides to mark the holes needed. (Inside pattern is for smaller plates #S-1514-10 and #LC-1519-15) (Outside pattern is used for the plates #SW-2013-10 and #658-2019-15)
- Page 4 The pattern on the The pattern on the left is used for the left is used for the 15" Plate 15" Plate Install a little silicone on the plate The stiffener plate will them be mounted between Delrin and bottom of the top box for extra strength.