Related Manuals for Model Train Technology 16 Port DCC LED Scene Controller II
Summary of Contents for Model Train Technology 16 Port DCC LED Scene Controller II
- Page 1 Model Train Technology™ 16 Port DCC LED Scene Controller II KEYPAD USER MANUAL Model Train Technology LLC 10524 Moss Park Rd. Ste. 204-256 Orlando, Florida 32832 407-242-5436 www.ModelTrainTechnology.com support@modeltraintechnology.com...
- Page 2 MODEL TRAIN TECHNOLOGY ™ Copyright© 2019 Model Train Technology LLC...
-
Page 3: Quick Start
MODEL TRAIN TECHNOLOGY ™ QUICK START PLUG POWER INTO ONE OF THE POWER SOCKETS. There are two options, use either but not both. PLUG YOUR LEDS INTO ANY OF THE LED 16 LED PORTS IDENTIFIED IN GREEN IN THESE PICTURES. - Page 4 MODEL TRAIN TECHNOLOGY ™ SLIDE THE POWER SELECTOR TO THE RIGHT FOR THE JST (WOODLAND SCENIC) POWER INPUT AND TO THE LEFT FOR THE ROUND BARREL INPUT (18V Adapter if you bought our kit). SLIDE THE POWER ON/OFF SWITCH TO THE RIGHT.
- Page 5 MODEL TRAIN TECHNOLOGY ™ TO CHANGE THE ANIMATION ON PORT#1: MAKE SURE AN LED IS PLUGGED INTO PORT #1 PRESS AND HOLD THE KEYPAD ON/OFF FOR 1 SECOND. THE DISPLAY WILL LIGHT AND SHOW: PRESS THE RIGHT HAND BLACK UP BUTTON TWICE SO THAT “3”.
- Page 6 MODEL TRAIN TECHNOLOGY ™ INTRODUCTION The LED Scene Controller II (LSC II) is a powerful but simple-to- use LED animation controller. 100 behaviors have been preprogrammed so it’s simply a matter of selecting an output port and then assigning a number representing that behavior.
- Page 7 MODEL TRAIN TECHNOLOGY ™ by setting the maximum brightness. This allows you to mix and match 3.3v and 12v LED on the same LSC II. We’ve enclosed the LSC II inside a sleek case and designed the base of the unit with a slot that allows you to slide the LSC II onto a matching mounting bracket.
- Page 8 MODEL TRAIN TECHNOLOGY ™ OVERVIEW 1. POWERING the LSC II (12-25V DC or AC, 1A) To provide maximum convenience and adaptability, the LSC II has two types of sockets into which you can connect power. YOU ONLY NEED ONE POWER SUPPLY.
- Page 9 MODEL TRAIN TECHNOLOGY ™ 3. An adapter (12-18vDC 1A recommended) with a 1.3mm Barrel plug. (available at this link or via our store) 4. 1.3mm barrel plug with terminal screws to connect your own wires to the LSC II. (Included) 5.
- Page 10 MODEL TRAIN TECHNOLOGY ™ OPERATIONS Use the POWER SELECTOR switch to select your power source. To turn on the LSC II, slide the right-hand slide POWER ON/OFF switch to the RIGHT. The blue LED on the top of the case will turn on.
-
Page 11: Adjusting The Led Brightness
MODEL TRAIN TECHNOLOGY ™ To switch between Animation mode and Configuration mode, push and hold button the LEFT TOP Keypad On/Off button for about 1 second and release. Pushing this button toggles back and forth between these two modes. The LSC II will not react to a very quick push. If your push is too long the LSC II will switch back and forth. - Page 12 MODEL TRAIN TECHNOLOGY ™ LSC II. The number on the right now indicates the brightness level 0-99% of the port that is selected on the left. Push the black Up and Down buttons on the right side of the LSC II to adjust the brightness up or down.
- Page 13 MODEL TRAIN TECHNOLOGY ™ If you forget what the button does and you have lost this piece of literature, flip the LSC II upside down to see the reference key. The arrow keys have a “fast” mode. If you hold the key down for 2 seconds, the rate of change roughly doubles.
- Page 14 MODEL TRAIN TECHNOLOGY ™ CONNECTING LEDs The LSC II has 16 Ports, labeled counterclockwise as viewed from the top of the LSC II. You can use the ports in any order.
- Page 15 MODEL TRAIN TECHNOLOGY ™ CONFIGUREING THE LSC II for Special Effects We suggest you start with some basic setting so you can quickly become familiar with how the LSC II works. Let’s start with what we call “singles”. Most of the special effects are grouped into TENs with the first digit representing the basic FX.
- Page 16 MODEL TRAIN TECHNOLOGY ™...
-
Page 17: Other Notes
MODEL TRAIN TECHNOLOGY ™ OTHER NOTES: • Some FX work with several ports in unison. Step, Chase, Race and TV sim work this way by design. But you can also mix effects on different ports. For example, you might use an Arc Welding FX with a flicker effect on a red LED to simulate the hot metal. - Page 18 MODEL TRAIN TECHNOLOGY ™ the device is powered and animation is activated. It doesn’t know what time of day it is. • Fade = 50. If you set a port to Fade using the preprogrammed value of 50, it will disable the Fade timer for that pin but set the pin to fade on command.
- Page 19 MODEL TRAIN TECHNOLOGY ™ the animations – assuming you are not connected to DCC. If you are connected to DCC, you must press F5 (Animation ON/OFF) to activate the device animation. • TV Simulation works with a White and Blue LED on separate Ports or in Color with a 3 separate Ports connected to an RGB (Red-Green- Blue) LED.
- Page 20 MODEL TRAIN TECHNOLOGY ™ WRITING CVs WITH THE KEYPAD If you don’t have a DCC system, it is still possible to change CV values in the range of 112 to 191 with the keypad. Check the MASTER CV LIST for the specific value you may want to change.
- Page 21 MODEL TRAIN TECHNOLOGY ™ one of those blocks and for the LSC II the user addressable CVs stopped at 191. Reading the Product, Assembly and software Edition numbers: Press and hold the lower left arrow key and the upper right arrow key for 5 seconds.
- Page 22 MODEL TRAIN TECHNOLOGY ™ Software Updates and new functionality. We are constantly receiving feedback from customers about new features and we add them as we can and seem appropriate. That means that your LSC II will have “old” software a week after we ship. Therefore, here is our upgrade policy: We will upgrade your software on the LSC II for two year FREE of charge, less shipping.
- Page 23 MODEL TRAIN TECHNOLOGY ™...
- Page 24 MODEL TRAIN TECHNOLOGY ™ Model Train Technology LLC 10524 Moss Park Rd. Ste. 204-256 Orlando, Florida 32832 407-242-5436 www.ModelTrainTechnology.com support@modeltraintechnology.com Version 1.1 LSC II Copyright© 2019 Model Train Technology LLC...
Need help?
Do you have a question about the 16 Port DCC LED Scene Controller II and is the answer not in the manual?
Questions and answers