Advertisement
Quick Links
________________________________________________________________________
Metrici Observer Radar is a hardware product developed by Metrici, which is set
up to work with Metrici LPR detection engines, as a rule enforcer for street traffic or
parkings.
The radar will record the speed of a vehicle which will be associated with the
detected number plate in Metrici database.
By default, the radar is set to trigger a detection with Metrici LPR when a speed
over 30 km/h is detected.
When installing Observer Radar, you must first link it to local network. In order to do
this, please remove the front screws, as in the next image.
________________________________________________________________________
www.metrici.ro
Metrici Observer Radar
- User's guide -
INTRODUCTION
INSTALLATION
Metrici – Observer Radar
rev. 01 | June 2018
Page 1 / 9
Advertisement
Summary of Contents for Metrici Observer Radar
- Page 1 By default, the radar is set to trigger a detection with Metrici LPR when a speed over 30 km/h is detected. INSTALLATION When installing Observer Radar, you must first link it to local network. In order to do this, please remove the front screws, as in the next image. ________________________________________________________________________ www.metrici.ro...
- Page 2 NOTE! The wire must be linked to a PoE switch as this Observer Radar is PoE powered. In order to properly function, you will need to set some data in radar menu and also in Metrici Control Panel.
- Page 3 01 | June 2018 ________________________________________________________________________ SETTINGS To connect to the Observer Radar type the IP address in a browser- 192.168.1.80. In Barix Settings choose SERIAL tab. For RS-232 option fill in 10001 for Local port, as in the next image.
- Page 4 Metrici – Observer Radar rev. 01 | June 2018 ________________________________________________________________________ Then go to CONTROL tab and fill in Web server port “80” and BCL Program Name “metrici”, if they are not already filed . ________________________________________________________________________ www.metrici.ro Page 4 / 9...
- Page 5 01 | June 2018 ________________________________________________________________________ CONNECTION TO METRICI For the radar to send a trigger to Metrici you need to fill some more parameters. Go to 192.168.1.80/metrici.html. You will enter Metrici Observer Radar interface and the text “When the speed is greater than 30 km/h send trigger over UDP to 0.0.0.0”.
- Page 6 01 | June 2018 ________________________________________________________________________ Now go to Metrici LPR and for LPR Engine Working Mode and External Trigger, we recommend using option Continuous and Started by TRIGGER. At Trigger device and type choose Barix Barionet 50, and write down the UDP port to be filled in Radar interface.
- Page 7 Metrici – Observer Radar rev. 01 | June 2018 ________________________________________________________________________ ________________________________________________________________________ www.metrici.ro Page 7 / 9...
- Page 8 Metrici – Observer Radar rev. 01 | June 2018 ________________________________________________________________________ Now go to Radar tab. A new window will open as in the next image. Choose the Radar Type, fill in its IP address (the default one is 192.168.1.80) and the TCP port as it is in the Barix Serial Settings.
- Page 9 ________________________________________________________________________ When Metrici Observer Radar is connected, after correctly filling the required data (IP address and TCP Port), the image of the license plate detected by Metrici will be saved together with the recorded speed of the vehicle. All recorded data can be later seen in Metrici Web Interface. The speed of a vehicle, the image from the moment of license plate detection and if it’s the case an image from...
Need help?
Do you have a question about the Observer Radar and is the answer not in the manual?
Questions and answers