Nymet WaterMe User Manual

Nymet WaterMe User Manual

Wireless irrigation controller

Advertisement

Wireless Irrigation Controller
User Manual
www.control-me.net
www.waterme.com.au

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WaterMe and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Nymet WaterMe

  • Page 1 Wireless Irrigation Controller User Manual www.control-me.net www.waterme.com.au...
  • Page 2 Nymet Australia have designed and manufactured a Wireless Irrigation Controller that is straightforward to install and simple to use. The WaterMe Wireless Irrigation Controller is capable of up to 10 programmable watering zones that can be controlled remotely through any device that has internet connectivity. e.g. Smart Phone, Computer or Smart TV at www.control-me.net Before you use WaterMe please read this installation guide thoroughly to ensure the product is con gured and installed correctly.
  • Page 3 CAUTION indicates a hazard in which, if not avoided, could result in damage to your WaterMe Wireless Irrigation Controller and it not functioning properly, and/or physical human damage LED De nitions Once the WaterMe Wireless Irrigation Controller has been connected to a power source, the main indication light will display a colour representing a connection type. Type...
  • Page 4 Unpack and Check Components Caution • Only use the equipment supplied by Nymet Australia i.e. Power Pack. Use of non approved components may result in damage to WaterMe and void the warranty Item Description WaterMe Wireless Irrigation Controller Rear Housing Assembly + Power Adapter (Connected)
  • Page 5 Pre-Installation Setup Before proceeding please ensure that you have the following items available to successfully install and connect your WaterMe Wireless Irrigation Controller. Item Description Desirable Essential Internal Network Wi-Fi modem connected to your network Internet Browser Chrome, Safari, Internet Explorer, Firefox...
  • Page 6: Table Of Contents

    WaterMe Wireless Irrigation Controller Section 2.0 Connection to the Internet Connecting via Wi-Fi through your Mobile Phone Register WaterMe Via your Mobile Phone Connecting via Wi-Fi through your Personal Computer Register WaterMe via your Personal Computer Section 3.0 Determine the Installation Location...
  • Page 7: How Does Waterme Operate

    The diagram below provides an example of how the WaterMe Wireless Irrigation Controller connects to the WaterMe Server and can be controlled through your computer or mobile phone. In most cases the controller is connected to the network via a Wi-Fi connection.
  • Page 8: Waterme Wireless Irrigation Controller

    The WaterMe Wireless Irrigation Controller can be controlled and monitored from any location by logging into www.control-me. net on a computer or through the WaterMe App which is available from the Apple App Store and Google Play (the WaterMe App is compatible with both Apple and Android devices).
  • Page 9: Connection To The Internet

    The range of Wi-Fi signal will vary depending on the model of your wireless modem and interference from nearby objects. As a general rule you will be able to achieve line of sight distances of around 50 metres. The WaterMe unit requires input of your network SSID and password.
  • Page 10: Connecting Via Wi-Fi Through Your Mobile Phone

    • It is advisable that you wire your WaterMe unit AFTER all software con guration is complete To con gure WaterMe from your mobile phone please ensure you have the following available: Item WaterMe Wireless Irrigation Controller Connection to a power supply 2.4 GHz or dual band capable router...
  • Page 11 • Once the information has been entered ensure Once WaterMe is in pairing mode, go back to the that your WaterMe Wireless Irrigation Controller is WaterMe app on your mobile device. connected to a power source and you have the top cover removed.
  • Page 12: Register Waterme Via Your Mobile Phone

    To complete the activation process you must register your WaterMe device on the WaterMe server to function. The registration process is simple and can be completed via your mobile device. Once WaterMe is registered you are able to login to the app using your email address and chosen password.
  • Page 13: Connecting Via Wi-Fi Through Your Personal Computer

    SECTION 2.3 Connecting via Wi-Fi through your Personal Computer Access Point Mode Method To con gure WaterMe from your personal computer please ensure you have the following available: Item WaterMe Wireless Irrigation Controller Connection to a power supply 2.4 GHz or dual band capable router...
  • Page 14 • The WaterMe controller will only scan for networks once The submit button will restart the WaterMe controller prompting it to attempt to join the selected network. Once the controller has connected to the server, the main status indicator light will show solid green and the...
  • Page 15: Register Waterme Via Your Personal Computer

    To complete the activation process you must register your WaterMe device on the WaterMe server to function. The registration process is simple and can be completed via your personal computer. Once WaterMe is registered you are able to login to the website using your email address and chosen password.
  • Page 16 Ensure that you know your correct encryption type of your home network (e.g. WPA, WPA, WPA2, Open) If you don’t know the above information you will not be able to connect your WaterMe Wireless Irrigation Controller to your Wi-Fi network.
  • Page 17: Determine The Installation Location

    Determine the Installation Location The WaterMe Wireless Irrigation Controller is designed for outdoor installation but it is recommended to be installed in a semi protected location e.g. under eves to avoid direct sunlight contact or exposure to harsh weather such as hail and rain. Please follow the steps below to ensure correct installation of your device as this will ensure maximum life and performance for your controller.
  • Page 18: Installation Types

    SECTION 3.1 Installation Types It is recommended that the WaterMe is installed with the bottom wire conduit facing the ground. WaterMe is uniquely designed to o er two installation types that provides access for both front and rear wire extrusion.
  • Page 19: Making An Incision In The Grommet

    The sensor and valve wires are required to exit the controller via the bottom or rear grommet. The silicon grommet needs to be cut to allow the sensor and valve wires to exit the controller. The WaterMe Wireless Irrigation Controller has two wire grommets, one at the base of the controller for standard installation and one at the rear for smart installation.
  • Page 20: Mounting The Waterme Wireless Irrigation Controller

    • O-rings are supplied in the screw mounting holes. Please ensure that these O-rings have not fallen out. Place the WaterMe Wireless Irrigation Controller into position on the wall and insert screws through the installation wall mount holes. Turn the screwdriver to the right to tighten the screws.
  • Page 21: Connecting The Valve And Sensor Wires

    The following information details the valve and sensor wire input de nitions. Ensure that the correct wires are xed into the correct locations to avoid incorrect operation and possible damage of the WaterMe Wireless Irrigation Controller. DC24 MOIS VPP RAIN FLW2 FLW3...
  • Page 22 Wiring Diagram Example The gure below provides an example of a wired connection through a standard installation with the valve and sensor wires extruding out of the bottom conduit. This is an example only and is a recommended installation con guration. Actual installation may vary based on individual setup.
  • Page 23 This will allow the ow sensor to monitor the amount of water ow during each watering cycle for each water outlet. A ow sensor can be used to detect any potential leaks in the irrigation system by monitoring water ow. WaterMe includes a 1” ow sensor.
  • Page 24: Connecting Wires To The Terminals

    Connecting Wires to the Terminals Please ensure you follow the correct procedure in connecting the valve and sensor wires to WaterMe. The controller has provisions for up to three ow sensors (one included), moisture sensor, rain sensor, a master valve and up to ten solenoid valves.
  • Page 25: Mounting The Front Housing

    O-ring is compressed. Ensure that the WaterMe base is securely xed to the wall then place the exterior housing onto the base. Make sure the indication lights are positioned so all are visible through the allocated holes on the external housing.
  • Page 26: Flow Sensor - Installation And Connection

    SECTION 6.0 Flow Sensor - Installation and Connection WaterMe includes a 1” ow sensor to allow for accurate real time statistical information on zone water ow and system leak detection. Where solenoids are not grouped together it may be necessary to install more than one ow sensor for zone speci c ow data collection.
  • Page 27 Flow Sensor - Installation Flow sensors are recommended to be installed between the master valve and solenoid valves as displayed. Additional ow sensors can be installed before solenoids in other zones to achieve zone speci c ow data and leak detection. This installation con guration is recommended as the ow sensor will record the ow of water during the watering cycle for each outlet and detect any potential leaks within the irrigation system.
  • Page 28: Additional Sensors - Installation And Connection

    Additional Sensors - Installation and Connection It is unlikely that you will require either a moisture sensor or rain sensor as WaterMe is intelligently designed to gather location speci c weather information directly from the internet. However, WaterMe does o er the option to install these devices if you...
  • Page 29: Website Navigation And Operation

    Website Navigation and Operation The following steps illustrate how to easily navigate through the WaterMe website interface. The website interface can be accessed from any computer as long as you have an internet connection. This allows remote connectivity to your irrigation system, with access to features such as adding schedules, updating schedule information, monitoring ow data and remotely shutting down the irrigation system if there is a potential leak.
  • Page 30 Web Interface: Summary Screen The summary screen is the main source of statistical information about your WaterMe Wireless Irrigation Controller. After initial setup the summary screen will be the most used screen. Main navigation bar Display the user currently logged in...
  • Page 31 5 6 7 Zone Con guration Functions Add a zone WaterMe allows you to add up to 10 zones to your irrigation system. To add a zone press the ‘Add a Zone’ button This will add zones in numerical order...
  • Page 32 Edit Zone Display Image To edit the zone display image click the orange display picture icon This will allow you to browse for a picture on your local computer that you would like to assign as the picture for your zone. This image can be updated at any time by following the same process.
  • Page 33 Web Interface: Schedule Screen The schedule screen allows you to setup reoccurring watering schedules for your garden. WaterMe allows up to 9 watering schedules as well as a weather schedule which takes e ect during warm weather forecast. Once watering schedules have been created WaterMe will manage your watering for you.
  • Page 34 Schedule Screen Functions Adding a Schedule To expand the content within a schedule you will need to press the ‘+’ button on the top left corner of the schedule window Select the start time of the schedule Select the days the schedule will run or run the schedule on odd/even days Zones that are available to run within the schedule are displayed.
  • Page 35 Encountering a Schedule Con ict During the setup of a schedule WaterMe will ensure two schedules do not overlap in watering time. If there is a con ict of time within the schedule...
  • Page 36: Weather Schedule

    SECTION 7.1 Weather Schedule Web Interface: Weather Screen WaterMe will automatically adjust your watering schedules based on local weather events. This feature is a must for serious water savings. Enter your suburb or postcode Local area map displaying suburb Turn weather rules On/O...
  • Page 37 Select up to 3 of the closest weather stations in range of your WaterMe device. Once the stations have been selected they will change to a dark blue colour and display current forecast information. The selected weather stations will list on the right hand side of the map.
  • Page 38 Set the default action for alarm errors Access to a submenu to select the default course of action in the event of an error in the system. This is required for WaterMe to take a course of action in the event of an error.
  • Page 39: Waterme Flow Calibration

    WaterMe Flow Calibration Before operation WaterMe must rst be calibrated to record the average ow rate for each zone. Calibration will tell your WaterMe controller what the average ow rate is for each zone. This data is used during normal watering to advise you if a change has occurred i.e.
  • Page 40: Deleting Your Waterme Account

    SECTION 7.3 Deleting your WaterMe Account WaterMe has the option to remove your device and settings from the server. This action should be used in the event you change your email address, sell your device or wish to change ownership.
  • Page 41: Mobile App Navigation And Operation

    Mobile App Naigation and Operation Mobile Interface: Summary Screen The summary screen is the main source of statistical information about your WaterMe Wireless Irrigation Controller. After initial setup the summary screen will be the most used screen. The summary screen allows you to add/delete zones, view total and zone speci c run time information as well as statistical data on your water usage.
  • Page 42 Add a Zone Uploading/Changing a Zone image WaterMe allows you to add up to 10 zones. Once a new WaterMe has the option to upload a picture of your garden zone has been added it will be placed in sequential order or patch of lawn allocated to each zone.
  • Page 43 Navigate to each Zone Panel Display Watering Start Time & Finish Time WaterMe allows you to view each added zone by scrolling your nger up or down to navigate to the required zone. Pressing the percentage icon at the top of the summary...
  • Page 44 Mobile Interface: Manual Screen The manual screen allows you to run a watering cycle without having to setup a reoccurring watering schedule. The manual screen can also be used to test zone function and calibrate average ow rates. Manual Screen Functions Turning Zones On/O To activate a zone with the manual program press the...
  • Page 45 Mobile Interface: Schedule Screen The schedule screen allows you to setup reoccurring watering schedules for your garden. WaterMe o ers up to 9 watering schedules as well as a weather schedule which takes e ect during warm weather. Once watering schedules have been setup WaterMe will manage your watering for you.
  • Page 46: Waterme Flow Calibration

    WaterMe Flow Calibration Before operation WaterMe must rst be calibrated to record the average ow rate for each zone. Calibration will tell your WaterMe controller what the average ow rate is for each zone. This data is used during normal watering to advise you if a change has occurred i.e.
  • Page 47: Waterme App Con Guration

    SECTION 8.2 WaterMe App Con guration Mobile Interface: Settings Screen The Settings Screen allows you to adjust any settings that are required for WaterMe to function. Settings Description Start ow calibration* Allows the system to calibrate the average ow running through the system for each zone.
  • Page 48 In this case the watering will be continuous for the set duration. Watering Time Zone ON The WaterMe system has been designed to accept 24VAC/24VDC solenoids or DC latching solenoids. Most irrigation solenoid valves are 24VAC types. WaterMe has been uniquely designed for a modulating output circuit. It...
  • Page 49 This value can be adjusted between 0.1 and 0.5. For the activating and zone 1 being activated. Nymet supplied ow sensor, this valve should always be set to 1.0. By adjusting this value it is possible to alter the output ow value.
  • Page 50 Default Action for Alarms WaterMe will notify you with an alarm when an error has Moisture sensor detection error. occurred in the irrigation system. • If the user sees this error, the controller has detected If the system is o and there is ow.
  • Page 51: Push Noti Cations

    WaterMe will automatically send you a push noti cation message in the event of an error in your irrigation system. A noti cation alert will display on your mobile device and an email will be sent to the registered email address on your WaterMe account.
  • Page 52: Weather Schedule

    WaterMe to water a percentage less for any watering schedules for that day in the event of rainfall. Adjust temperature forecast rules. If there is a forecast for hot weather conditions you are able to setup WaterMe to water a percentage more for allocated zones within your garden. Even if there is no allocated schedule for that day WaterMe will still water you plants in the ‘weather schedule’...
  • Page 53 To adjust the ‘Rainfall Forecast Rules’ and ‘Temperature to locate up to three local weather stations. This Forecast Rules’ to modify watering during speci ed allows WaterMe to retrieve local weather forecasts on weather events. a daily basis to prevent under or over watering your WaterMe is able to automatically adjust temperature garden.
  • Page 54 Turn on mist/continuous watering the ambient temperature for the day reached 37ºC and Select the duration each zone will water each zone was set to run for 10mins, WaterMe would re-adjust the run time to 7.5mins. Set up the Weather Schedule Information •...
  • Page 55: Troubleshooting

    If you have more than one controller connected to the Wi-Fi network WaterMe will the WaterMe activation process not connect. Disconnect the power from the currently active controller and restart the activation process. If you are still having trouble with your WaterMe controller please contact customer support at support@waterme.com.au...
  • Page 56: Exclusions Of Liability

    Exclusions of Liability The content of this document is periodically checked and revised where necessary. Discrepancies may therefore exist. Please be advised that Nymet may make changes without notice. Please visit the WaterMe website for information on updates and latest product information.

Table of Contents