Summary of Contents for Puredrive Hybrid Series
- Page 2 Hybrid – 5 & 10kWh Simple installation process 1. Install Solis Hybrid Inverter 2. Position the Battery 3. Connect the DC Power Cables 4. Connect the communication Cables 5. Set up the Solis 6. Switch on the Battery...
- Page 3 Hybrid Installer’s Guide Install Solis Hybrid Inverter Install the Solis Hybrid Inverter as per the manufacturers installation guide...
- Page 4 Hybrid Installer’s Guide Position the Battery close to the Solis unit Take the lid off the battery to expose the carrying handles Ensure the selection switch inside the battery is set to 0...
- Page 5 Hybrid Installer’s Guide Connect DC power cables to Solis Unit Connect the cables supplied with the Solis Unit to the battery connection on the Solis...
- Page 6 Hybrid Installer’s Guide Connect DC power cables to Battery 14/10 mm Lugs required...
- Page 7 Hybrid Installer’s Guide 3c. Extra for 10kWh hybrid versions a) For the 10 kWh Hybrid the 2 batteries will need to be connected to each other. Connect the A battery first, then the B battery b) Plug the communication cables between the two off batteries as shown.
- Page 8 Hybrid Installer’s Guide Connect Coms Cable between Solis and Battery You will need a short RJ45 straight through patch lead...
- Page 9 Hybrid Installer’s Guide Follow setup instructions for the Solis Select ‘Puredrive’ option during set...
- Page 10 Hybrid Installer’s Guide Switch on the Battery Press the plain Press the power button till it button till it turns latches green...
Need help?
Do you have a question about the Hybrid Series and is the answer not in the manual?
Questions and answers