Download Print this page

Off the Wall Quilt Cheryl Ann's Design Walls Assembly Instructions

Download this manual

Cheryl Ann's Design Walls by Off the Wall Quilt

Parts List:

1 Flannel Wall

8 Poles (sides & legs)

2 Stabilizer Bars

6 Clips

4 Corners

2 End Caps

1 Kit Bag

Prefer video instructions?

Visit us at

www.OffTheWallQuilt.com

Step 1:

Lay the flannel wall out flat

Step 2:

Assemble the poles by sliding the sections together. Insert 4

poles into the hemmed edges on each of the 4 sides of the

flannel wall

Step 3:

Connect poles at corners using corner pieces.

Assembly Instructions

IMPORTANT:

Flannel shrinks! We recom-

mend cleaning it with a lint

brush but if washing be-

comes necessary, wash only

in cold water and immedi-

ately place the flannel back

on the fully assembled

frame to dry. NEVER put the

wet flannel in a dryer or

shrinkage will occur.

If your clips seem to slip off the poles, try

wrapping a piece of tape around the end of

the pole

Need help?

Do you have a question about the Cheryl Ann's Design Walls and is the answer not in the manual?

Page 1 Cheryl Ann’s Design Walls by Off the Wall Quilt Assembly Instructions Parts List: IMPORTANT: 1 Flannel Wall Flannel shrinks! We recom- 8 Poles (sides & legs) mend cleaning it with a lint 2 Stabilizer Bars 6 Clips brush but if washing be-...
Page 2 Step 4: Place a clip on each end of a pole and snap onto the frame (avoiding the silver connecting piece on 72” walls) in approxi- mately the middle of a side. Rotate the wall 90 degrees and add another cross piece. The clips may be hard to attach the first time, you may need to step on it gently until it “snaps”...