1. Manuals
  2. Brands
  3. L’EPEE 1839 Manuals
  4. Time Clocks
  5. Space Clock
  6. Manual

L’EPEE 1839 Space Clock Manual

Hide thumbs

Advertisement

Table of Contents

CONGRATULATIONS
You have just acquired Space Clock, an advanced
timepiece by L'Epée 1839.
The Space Clock was designed and developed
with passion and care by L'Epée 1839's master
watchmakers in Delémont, Switzerland.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Space Clock and is the answer not in the manual?

Questions and answers

Related Manuals for L’EPEE 1839 Space Clock

Summary of Contents for L’EPEE 1839 Space Clock

  • Page 1 CONGRATULATIONS You have just acquired Space Clock, an advanced timepiece by L’Epée 1839. The Space Clock was designed and developed with passion and care by L’Epée 1839’s master watchmakers in Delémont, Switzerland.
  • Page 2 CONTENTS Important information Care and Maintenance The Key Winding the movement Setting the time Hours and Minutes display...
  • Page 3 IMPORTANT INFORMATION Please be very careful to never touch the red components pictured below. The movement should never be in contact with any liquids - even in vaporized form. If it occurs, the clock should be serviced immediately. A simple contact on certain pieces can generate delays in timekeeping, which can only be solved by servicing.
  • Page 4 . It is recommended to keep the clock distant from any source of heat or vibrations. To preserve the longevity and functionality of Space clock, do not permanently expose the clock to direct sunlight or in a humid or dusty place.
  • Page 5 The two activators on the side of the Space Clock are for winding the movement and setting the time with the winding key A ( 2 : 1 ) SETTING: POUR METTRE A L'HEURE, TOURNER DANS LE SENS INVERSE DES AIGUILLES D'UNE MONTRE ENERGY: POUR RECHARGER, TOURNER LA CLE DANS LE SENS DES AIGUILLES D'UNE MONTRE...
  • Page 6 WINDING THE MOVEMENT The movement should be fully wound every 8 days. Be sure to wind up the spring completely. At the end of the winding procedure, you will feel the necessary force increase significantly; do not wind further as this is the sign that the movement is fully wound.
  • Page 7 SETTING THE TIME Using the key, turn anti-clockwise in order to set the time. Be careful, setting the time in the wrong way could damage the mechanism and a service would be needed immediately. SETTING THE TIME Anti-clockwise...
  • Page 8 HOURS AND MINUTES DISPLAY Hours and minutes are diplayed on two rotating disks. The current time is indicated by small V shaped needles. Example: Here it is 12:00...

Table of Contents