Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Cellvision Systems WLC-101M
Summary of Contents for Cellvision Systems WLC-101M
- Page 1 WLC-101M Wireless mini ISA Module User’s Manual...
-
Page 2: Fcc Statement
WLC-101M Wireless ISA Module complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. - Page 3 or transmitter This device is intended only for OEM integrators under the following conditions: The antenna must be installed such that 20 cm is maintained between the antenna and users. For laptop installations, the antenna must be installed to ensure that the proper spacing is maintained in the event the users places the device in their lap during use (i.e.
- Page 4 device. Service Center in U.S.A Company Name : D-Link Corporation. Company Address: 53 Discovery Drive Irvine, CA 92618, USA Tel: (949) 788-0805 - 3 -...
-
Page 5: Specification
1. Introduction The WLC-101M Wireless mimi ISA module is the perfect solution for your wireless network applications based on the IEEE 802.11b standard offering a data rate of 11Mbps in a wireless LAN environment. WLC-101M is designed for Printer Server series, IP Camera series and Internet Video Server gives you wireless access the web and network resource without the wire. -
Page 6: Hardware Installation
< -88dBm 4. Hardware Installation The following sections in this chapter describe how to install WLC-101M Module 4.1. Installation Overview WLC-101M wireless module is design for Printer Server series, IP Camera series and Internet Video Server only. - 5 -... -
Page 7: Safety Recommendations
4.2. Safety Recommendations The safety guidelines are as follows: λ Keep the board area clear and dust-free before, during, and after installation. λ Keep tools away from walk areas where you and others could fall over them. λ Do not wear loose clothing or jewelry, such as earrings, bracelets, or chains, that could get caught in the board. - Page 8 Remove the WLC-101M module from its protective packaging. λ Avoiding Electrostatic Discharge Before you install the WLC-101M module, ground yourself by touching a piece of metal to avoid electrostatic discharge (ESD). You should also take the following precautions to prevent damage to the WLC-101M module: λ...