Pixel SMFGX1 Installation Instructions

Package Includes
(1) SiriusXM™ PowerConnect™ Vehicle Cradle
(1) SiriusXM™ 5 Volt Hardwired Power Adapter
(1) Handlebar Clamp Mount
(1) Handlebar Strap Mount
(1) RAM Ball Mount Adapter (25 MM)
Protec ve Case Installa on Loca on
Before ge ng started, it is important to select an installa on loca on for the protec ve case with receiver
and the strap mount antenna. It is also recommended to run the cables from your power source to the dock,
before hooking up the wires to ensure the cables will reach the dock inside the protec ve case.
Step 1 - Install Clamp Mount (or Strap Mount)
A er selec ng the installa on loca on for the protec ve case, loosen the two screws on the handlebar
clamp mount all the way out and separate it from the back side of the clamp mount. Place the clamp mount
on the handlebars, line up the screw holes, and ghten the screws to mount the clamp. Use the supplied
rubber strips to increase the grip of the mount.
Pixel Technologies, Inc. | www.pixelsatradio.com | contactus@pixelsatradio.com | (800) 595-0845 | Page 1
SMFGX1 (HWBK5) - Satellite Radio Motorcycle Kit
(1) Weatherproof Protec ve Case
(1) SiriusXM™ Antenna*
(1) Auxiliary Cable
(1) AMPS Plate with Screws
*ÊAntennaÊmayÊbeÊdifferentÊdependingÊonÊkitÊpurchased.
Loosen this screw
Loosen this screw
Installa on Instruc ons
Rubber inserted here