1. Manuals
  2. Brands
  3. DayStar Digital Manuals
  4. Computer Hardware
  5. TURBO 040
  6. User manual

DayStar Digital TURBO 040 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
U S E R M A N U A L
. .
• .• .• .W W m V m D
I
G
I
T
A
L

Advertisement

Table of Contents
loading

Summary of Contents for DayStar Digital TURBO 040

  • Page 1 U S E R M A N U A L • .• .• .W W m V m D...

  • Page 3: Table Of Contents

    PREFACE- About The Turbo 040 About the Turbo 040______________________ 9 Upgrade Program________________________ 1 0 Included with your Turbo 040------------- 1 0 Included with your Adapter________________1 0 Installation tools required__________________ 1 1 Complete the warranty card________________1 1 About this manual________________________ 1 1...
  • Page 4 CHAPTER 2 - Installing The Turbo 040 - Mac SE/30 Installing the Turbo 040 in the Mac SE/30 — 27 Prepare the Mac SE/30 for installation-------27 Begin the installation_____________________ 28 Insulating the brackets--------------- 30 Preparing the Turbo 040-------------- 3 1...
  • Page 5 CHAPTER 4- Installing The Turbo 040 - Mac IIx Installing the Turbo 040 in the Mac IIx------5 1 Prepare the Macintosh IIx for installation____5 1 Begin the installation____ _________________ 52 Removing the drive tray______________ 53 Installing SIMMs____________________ 54 Removing the CPU c h ip ______________ 55...
  • Page 6 CHAPTER 6 - 040 - Mac Installing The Turbo Installing the Turbo 040 in the Mac Ilsi----- 8 1 Prepare the Macintosh Ilsi for installation--- 8 1 Installing the metal shield____________ 83 Installing an additional card___________83 Installing the DayStar Turbo 040----------- 84...
  • Page 7 System software contamination___________ 1 1 7 Incompatible formatting software----------1 1 8 APPENDIX A- Performance Notes Performance tips_________________________1 2 1 68040 compatible software________________122 T A B L E C O N T E N T S DayStar’ s Turbo 040 For The Macintosh...
  • Page 8 Product warranty_______________________ 126 Upgrading the Turbo 040_________________ 127 How to return your board for service------- 127 Contacting DayStar online________________ 128 T A B L E C O N T E N T S DayStar’ s Turbo 040 For The Macintosh...

  • Page 11: Preface

    NOTE: There are tw o versions of the Turbo 040. The Although standard Turbo 040 uses the M otorola 68040...

  • Page 12: About The Turbo 040

    P rogram its customers. For further inform ation on u pgrading to m ore speed or chan gin g platforms, turn to page 127, “ U pgrading the Turbo 040” , in A ppendix B. Included The Turbo 040 is shipped w ith the follow ing...

  • Page 13: Installation Tools Required

    A b ou t this This manual provides basic information for m anu al installing and using the DayStar Turbo 040. If you are unfamiliar with using the Macintosh, review the O w ner’ s Guide before installing the board.
  • Page 14 9: “ Installing The Turbo 040 Software” covers the procedures for installing and using the software includ­ ed w ith the Turbo 040. It also contains sec­ tions on troubleshooting and com patibili­ ty issues, should you experience any problems.

  • Page 17: Getting Started

    Turbo 040. Note: Your Turbo 040 may look slightly dif­ ferent than the one pictured above. The installation and functionality is identical for all Turbo 040 cards.

  • Page 18: Precautions

    P recaution s Here is a brief list of precautions that help ensure proper grounding: * WEAR THE ANTI STATIC WRIST STRAP * DO NOT attempt installation on a carpet­ ed floor. * DO NOT wear leather sh oes — w e recom ­ m en d shoes w ith rubber soles.
  • Page 19 Remove any SE/30 expansion cards that installer to a may be present and insulate the brackets. CRT vacuum tube which Install the Turbo 040 into the DayStar 1 0 . can implode Adapter PDS and then install the com ­ or cause...
  • Page 20 CPU and AMU socket. Press above the socket conn ection until the board is seated. Connect the Turbo 040 to adapter board. Test the installation - Attach the pow er cord. Restart the M ac II. Listen for the cu s­...

  • Page 21: For The Mac I I

    Adapter over the em pty CPU socket. Press NOTE: above the socket until the board is seated. An adapter is 1 1 . Connect the Turbo 040 to adapter board. required for installing the Test the installation 1 2 .
  • Page 22 O nce aligned, gently press the center of the socket connection until it is firmly seated. Reinstall the power supply. Connect the Turbo 040 to the adapter. NOTE: Test the installation 1 1 .

  • Page 23: For The Mac Ilsi

    7 . Attach the metal shield to the adapter. configuration. (NuBus Adapter only) 8 . Connect Turbo 040 to the adapter’ s middle connector. If adding an additional card to the top slot, d o so now. (If the addi­...
  • Page 24 7 . If present, remove any card from the accelerator slot. Install the Turbo 040 - C onnect the Turbo 040 to the accelerator slot. Test the installation - Attach the pow er NOTE: cord. Restart the Mac. Listen for the Some custom ary “...

  • Page 25: For The Mac Ilc I

    Install the Turbo 040 - Connect the Turbo 040 to the cache conn ector slot. Test the installation - Attach the pow er cord. Restart the Mac. Listen for the custom ary “...
  • Page 26 R em ov in g the If you m ust rem ove the Turbo 040, follow the Turbo 040 instructions below: L Rem ove the QuadControl software from the Control Panels Folder. 2 . Follow the “ Quick Installation Instructions”...
  • Page 27 W** « Ha Kr* « , * « x :• • . ■ J . * * , * * * ! ! » * * *, “ * * * * • 1 * * 1 * * A * « ^ * s * * * , / “...
  • Page 29 Installing the You will need both the Turbo 040 (SE/30 c o m ­ Turbo 040 in patible version) and the Adapter SE/30. the M ac SE/30 Turbo 040 Adapter PDS WARNING! DayStar recommends you have the Turbo 040 installed by your dealer or an Apple Authorized Technician.

  • Page 30: Begin The Installation

    SE/30 adapter, rem ove the four cover screw s on the rear of the Mac. Four screws Reset switch Figure 1 SE/30 cover screw C H A P T E R Installing The Turbo 040 - Macintosh SE/30...
  • Page 31 4. Carefully place the M acintosh back on its bottom, bein g certain not to m ake contact with the CRT or pow er supply. PDS Connector Power Supply Figure 3 - Macintosh SE/30 op en ed CHAPTER Installing The Turbo 040- Macintosh SE/30...

  • Page 32: Insulating The Brackets

    7 . Install the electrical tape included w ith b ra ck ets your adapter to the ends of the front and rear brackets. Electrical tape installed Figure 5 - Brackets insulated for installation C H A P T E R Installing The Turbo 040 - Macintosh SE/30...

  • Page 33: Preparing The Turbo 040

    P reparin g 1 . Align the Turbo 040 card w ith the included the Turbo 040 adapter board. Squ eeze the conn ectors together until the board is fully seated. Figure 6 - Connecting Turbo 040 to Adapter Installing the...
  • Page 34 PDS slot, gently press dow n until it is fully seated. Figure 8 - Installing the com bin ed boards 4. The Turbo 040 is n ow installed. Figure 9 - Turbo 040 installed C H A P T E R...
  • Page 35 2 . Tighten the cover screws. 3 . Attach all cables you have removed. Now you are ready to install the software. Please go to Chapter 9, “ Installing the Turbo 040 Software.” C H A P T E R...
  • Page 36 (for it to discharge). 2. Review the instructions. Verify proper instal­ lation, m aking sure the Turbo 040 and the Adapter are fully seated over the PDS slot. 3 . Plug the pow er cord into the back of the M acintosh SE/30 and restart as before.
  • Page 39 Installing the You will need both DayStar’ s Turbo 040 (Mac II Turbo 040 in com patible version) and the Adapter II. the M ac II Turbo 040 Adapter II P rep a re the Installation of the DayStar Turbo 040 was M acintosh II designed to be easy.
  • Page 40 A pple M acintosh II O w n er’ s Guide. depress latches and lift top corners Figure 12 O pen in g the cover C H A P T E R Installing The Turbo 040 Macintosh II...
  • Page 41 Figure 14 - View o f the cobles C H A P T E R Installing The Turbo 040 - Macintosh II...
  • Page 42 SIMMs can be easi­ ly accessed. You are n ow ready to proceed w ith the instal­ lation of the Turbo 040 for the M ac II. C H A P T E R Installing The Turbo 040...
  • Page 43 Before installing the DayStar Turbo 040, you R em ov in g the must rem ove the original M acintosh MC68020 CPU chip CPU chip and AMU. (Some Mac IIs have a PMMU instead of an AMU. Follow the sam e procedure for either chip.) Find the Pin Grid...
  • Page 44 CPU and the socket and NOT betw een the socket and the motherboard. 68020 (CPU) chip CPU socket motherboard Figure 19 - Inner tool sliding over the 68020 chip C H A P T E R Installing The Turbo 040 - Macintosh II...
  • Page 45 The tool should rest on the m otherboard and not on any other chips. Put the w in g nut on the threaded piece. Figure 2 1 - Outer tool over p rocessor C H A P T E R Installing The Turbo 040 - Macintosh II...
  • Page 46 7. Put the CPU in a safe place so that you may reinstall it later if necessary. Tip: After you install the Turbo 040, use the protective foam you w ill be rem oving from the adapter board to protect the p in s on your CPU a n d AMU.
  • Page 47 120 pin con ­ nector is toward the front of the machine. align pins with sockets Figure 24 Aligning the adapter b o a rd C H A P T E R Installing The Turbo 040 Macintosh II...
  • Page 48 Figure 24a - Press on center o f socket connections Installing the 5 . Position the Turbo 040 card w ith the D ay Star included adapter board so that the Turbo Turbo 040 040 is face up and the connector is toward the front of the machine.

  • Page 49: Testing The Installation

    3 . Replace the case cover and screw. Attach all cables you have removed. N ow you are ready to install the software. Please go to Chapter 9, “ Installing the Turbo 040 Software.” C H A P T E R...
  • Page 50 Then, • Squ eeze the Turbo 040 and adapter board together. • Push dow n on the Turbo 040 assem bly w ith your fingers in the center of the CPU and AMU sockets. 2 . Plug the pow er cord into the back of the M acintosh II and restart as before.

  • Page 53: Installing The Turbo 040 - Mac

    Installing the You will need both DayStar’ s Turbo 040 (Mac Turbo 040 in IIx com patible version) and the Adapter IIx. the M ac IIx Turbo 040 NOTE: The adapter IIx must be part #000339. Earlier mod­ els did not support the Turbo 040.

  • Page 54: Begin The Installation

    Macintosh. NOTE: This procedure is detailed in the A pple O w n er’ s Guide. depress latches and lift top corners Figure 27 O pen in g the cover C H A P T E R Installing The Turbo 040 Macintosh IIx...
  • Page 55 Detach the hard drive’ s pow er plu g from the motherboard. disconnect power cable from mother­ board disconnect ribbon cables from mother­ board Figure 29 - View o f the cables CHAPTER Installing The Turbo 040 - Macintosh IIx...

  • Page 56: Installing Simms

    SIMMs can be easily accessed. You are n ow ready to proceed w ith the instal­ lation of the Turbo 040 for the Mac IIx. C H A P T E R Installing The Turbo 040...

  • Page 57: Removing The Cpu Ch Ip

    R em ov in g the Before installing the DayStar Turbo 040, the CPU chip original Macintosh MC68030 CPU chip m ust be removed. DayStar has provided a Pin Grid Array (PGA) Puller for rem oving these chips. NOTE (Important: See “ Inspecting the CPU chip” sec­...
  • Page 58 CPU and the socket and NOT Figure 34 Inner tool sliding over the 68030 processor C H A P T E R Installing The Turbo 040 - Macintosh IIx...
  • Page 59 T he tool should rest on the m otherboard and not on any other chips. Start turning the w in g nut onto the thread­ ed piece. Figure 36 Outer tool over processor CHAPTER Installing The Turbo 040 Macintosh IIx...
  • Page 60 W00339. Earlier models do not support the Turbo 040. Contact DayStar Customer Service if you need to exchange adapters. Figure 38 Installing motherboard CPU onto adapter CHAPTER 4 - Macintosh IIx Installing The Turbo 040...

  • Page 61: Installing The Daystar Turbo

    If you have to push with extreme force, the pins have not been properly aligned, and will bend. Figure 40 Installing adapter CHAPTER Installing The Turbo 040 Macintosh IIx...
  • Page 62 1 1 . Align the Turbo 040 card w ith the included adapter board. Squ eeze the conn ectors together w ith both hands until the board is fully seated. Turbo 040 installs at a 4 5 ° angle to...

  • Page 63: Testing The Installation

    3 . Replace the case cover and screw. Attach all cables you have removed. N ow you are ready to install the software. Please g o to Chapter 9, “ Installing the Turbo 040 Software.” CHAPTER Installing The Turbo 040...
  • Page 64 Then, • Squ eeze the Turbo 040 and adapter board together. • Push dow n on the Turbo 040 assem bly w ith your fingers in the center of the CPU socket. 2. Plug the pow er cord into the back of the M acintosh IIx and restart as before.

  • Page 67: Installing The Daystar Turbo 040

    Installing the You will need both Day Star’ s Turbo 040 (Ilex Turbo 040 in version) and the Adapter Ilex. the M ac Ilex Turbo 040 Adapter Ilex P rep a re the Installation of the DayStar Turbo 040 was designed to be easy.

  • Page 68: Begin The Installation

    4 . Turn off the Macintosh Ilex and rem ove the pow er cord and all accessory cables from the back of the Macintosh. 5 . Press the power switch on the right rear of the Mac three tim es to drain the pow er supply.

  • Page 69: Removing The Power Supply

    lift out and up on latches and raise top Figure 43 - O pen in g the cover R em ovin g 3 . Remove the pow er supply from the the p o w e r M acintosh Ilex using the Power Supply su p p ly U nlocking Tool.
  • Page 70 View o f 68030 . Put on the anti-static w rist strap. You are n ow ready to proceed w ith the installation of the Turbo 040. C H A P T E R Installing The Turbo 040- Macintosh Ilex...

  • Page 71: Inspecting The Cpu Chip

    Macintosh Ilex, the original M acintosh MC68030 CPU chip m ust be removed. NOTE: Since the Turbo 040 requires a socket for instal­ Most Mac lation, you w ill need to verify w h ich type of Ilex ’ s have a CPU chip you have.
  • Page 72 R em ov in g . Rem ove the w in g nut from the top of the the CPU chip PGA Puller, separating it into three parts. T hese parts will be referred to as the inner tool, the outer tool and the w in g nut. assembled PGA puller inner tool...
  • Page 73 3. Gently slide the inner tool over the MC68030 processor, beginning at the rear of the CPU. Be sure that the teeth of the inner tool are between the CPU and the socket and NOT between the socket and the motherboard. Figure 50 - Inner tool sliding over the 68030 processor 4 .
  • Page 74 This w ill lift the CPU from its socket evenly. Figure 53 - Removing the processor C H A P T E R Installing The Turbo 040- Macintosh Ilex...
  • Page 75 Installing the 1 . The adapter board contains a square set of a d a p te r pins that connect the Turbo 040 to the pro­ b o a r d cessor socket on the Mac Ilex motherboard. Remove the protective foam from the adapter’...
  • Page 76 3 . W ith the adapter’ s pins aligned w ith the CPU socket, gently press above the center of NOTE the socket conn ection on the adapter board You should until it is fully seated. W hen the adapter is only feel fully seated, the pow er su p p ly ’...
  • Page 77 Installing the . Reinstall the M acintosh Ilex pow er supply. D ayStar . Align the Turbo 040 card w ith the installed Turbo 040 adapter board. Squ eeze the connectors together w ith both hands until the board is fully seated.
  • Page 78 Mac Ilex. Then, d o the following: 1 . Review the instructions and verify proper installation. Then, • Squ eeze the Turbo 040 and adapter board together. • Rem ove the pow er supply. C H A P T E R...
  • Page 79 DayStar Technical Support (9 am to 6 pm EST) at 404-967-2077 for further assistance. You can also contact DayStar online through CompuServe: 75300,1544, AppleLink: DAYSTAR.TECH, America Online: DAYSTAR OL or GEnie: DAYSTAR. C H A P T E R Installing The Turbo 040- Macintosh Ilex...
  • Page 83 Installing the You will n eed both DayStar’ s Turbo 040 and Turbo 040 in either the Adapter Ilsi, DualPort Ilsi or Adapter the M ac Ilsi Ilsi - NuBus. T he Adapter Ilsi and the DualPort Ilsi provide a pass-through PDS (processor direct slot) for an additional PDS card.
  • Page 84 If you installed a hard drive into your Ilsi, Turbo 040, con­ the drive may have to be m oved forward tact DayStar at slightly in order to install the Turbo 040. 404-967-2077. 1 0 . Remove any existing PDS cards. Hard drive SIMMs...
  • Page 85 Squeeze the PDS o r NuBus connectors together with both hands until card the board is fully seated. Note: T he Turbo 040 will ignore math chips on any other cards. Warning: DO NOT plug any PDS boards into the board’...

  • Page 86: Installing The Daystar Turbo 040

    Installing the . C onnect the Turbo 040 to the m iddle con ­ D ayStar nector of the adapter. Note that the Turbo Turbo 040 040 will be facing up (it only fits on e way). IMPORTANT: Connect the...
  • Page 87 M acintosh chassis and into the NuBus A dapter’ s m etal shield. Figure 63 Installing the thumb screws Installation of the Turbo 040 assem bly is now complete. You are ready to proceed w ith test­ ing and software installation. Testing the Check that all conn ection s are tight.
  • Page 88 Then, d o the following: 1 . Review the instructions and verify proper installation. Then, • Squ eeze the Turbo 040 and adapter board together. • Push dow n on the adapter to verify a goo d con n ection w ith the m otherboard PDS socket.
  • Page 91 Installing the No adapter is required for this installation. The Turbo 040 in Turbo 040 (IIvx, Ilvi, Performa 600 com patible the M ac IIvx, version) plugs directly into the accelerator slot Ilvi, P erform a on the Mac. NOTE: Some Turbo 040’...
  • Page 92 3 . Locate the accelerator slot and rem ove any existing cards. 4. W ith the com p on en t side of the Turbo 040 facing the pow er supply, align the board’ s conn ector over the 120 pin conn ector on the motherboard.

  • Page 93: Testing The Installation

    Figure 65 Installing the Turbo 040 You have installed the Turbo 040. Now you must test the installation and install the software. Testing the Please read all of this section before you test the installation. installation Plug the pow er cord into the back of the Macintosh.
  • Page 94 1 . Review the instructions and verify proper installation. Then, • C heck that the Turbo 040 is firm ly seated in the accelerator slot. 2. Plug the pow er cord into the back of the M acintosh and restart as before.
  • Page 97 No adapter is required for installing the Turbo Turbo 040 in 040 (Mac Ilci com patible version) in the Mac the M ac Ilci Ilci. The Turbo 040 plugs directly into the cache slot of the Mac. Turbo P rep a re the...
  • Page 98 3 . Locate the cache slot and rem ove any exist­ in g cards. 4. W ith the com p on en t side of the Turbo 040 facing the pow er supply, align the board’ s connector over the 120 pin cache slot on the motherboard.
  • Page 99 Cache Slot Figure 67 - Installing the Turbo 040 Testing the You have installed the Turbo 040. Make sure all installation connections are tight. You m ust n ow test the installation and install the software. Please read all of this section before you test the installation.
  • Page 100 1 . Review the instructions and verify proper installation. Then, • Make sure the Turbo 040 is firm ly seated in the cache slot. 2. If the failure tone was heard, m ake sure all of the SIMMs are properly installed.
  • Page 103 U pdating If you are u sing System software prior to 7.5, y o u r w e recom m en d that you update your netw ork­ n etw o rk in g ing files for optim al netw orking performance. s o ftw a r e Follow these steps to install A pple’...
  • Page 104 U sing To access the QuadControl software, select C on­ Q u a dC on trol trol Panels from the Apple pull-down menu. Select or double click on the QuadControl icon. The follow ing screen will appear: NOTE: QuadControl System 6.x DAYSTAR users should have 32-bit...
  • Page 105 [BRI - This m ode pro­ C o p y B a c k (040 M o d e ) vides the fastest performance, but is incom patible with older applications that don ’ t support the 68040. W hen this m ode is selected, inform ation is copied to the internal 040 cache, then at a later time, copied to m otherboard memory.
  • Page 106 W ith the cache off, the Mac still runs at the accelerated clock speed, but perform ance is sig­ nificantly reduced. P ow erM ath P I PowerMath (Turbo 040 only, not available on Turbo 040i) - Allows you to turn DayStar’ s Note: PowerMath on and off.
  • Page 107 I H S e c o n d a r y C a c h e 128K E n h a n ced P o v e r M a t h | _ ______ Turbo 040 Info... V2.3 © 1992-94 DayStar Digital, Inc.
  • Page 108 M acs your Turbo 040 supports. (If you w ish to m ove your Turbo 040 to a Mac that is not listed here, see “ U pgrading the Turbo 040” on page 127.)
  • Page 109 Virtual Memory is On is displayed if you have turned Virtual M em ory on in A pple’ s M em ory Control Panel. MacsBug Typing Fix is On is displayed if you have turned this feature on. (See “ A dvanced QuadControl O ptions” for m ore inform ation on page 110.) 68040 Data Cache is Off is displayed if the...
  • Page 110 A d v a n ced QuadControl can provide a display of your cur­ System rent system information. Press COMMAND-CON­ Inform ation TROL and click on the DayStar logo. A dialog box similar to the one below will be displayed: ROM Uersion: $178 ROM Checksum: $97221136 RppleTalk Uersion: 57.4.128.0...
  • Page 111 Machine Type: is the kind of machine. MMU Type: is the kind of m em ory m anage­ ment unit installed. Physical RAM: displays the am ount of m e m o ­ ry installed on the motherboard. ROM Size: show s the size of the M acintosh ROMs on your machine.
  • Page 112 § | D is a b le M e m o r y T e s t I n d ic a t o r ..71 O K " " Figure 74 - A dvanced Features C H A P T E R Installing The Turbo 040 Software...
  • Page 113 Turbo 040 is installed. T he instruction cache is still enabled, so program s will EXECUTE faster, but all data operations will be uncacheable and will not even benefit from the sec­...
  • Page 114 Technical Support at 404-967-2077. | MacsBug Typing Fix - There is a A pple’ s debugger, MacsBug, w h ich m akes typing very slu ggish w h en the Turbo 040 is MacsBug Typing Fix installed. The solves this problem, but it w ill slow dow n system perform ance on som e operations by about 5%.
  • Page 115 QuadControl and D ebu gger Prefs. Quadra Compatibility - T he Turbo 040 provides an added perform ance enh ance­ m ent similar to that found on the Quadra 840AV w h ich m ay cause a very sm all n u m ­...
  • Page 116 Trouble­ If you experience the following: sh o otin g T he Mac plays a failure tone or w ill not boot w ith the Turbo 040 installed, Virtually every application crashes the machine. Try: D isabling the Control Panels and System Extensions.
  • Page 117 NuBus cards you have installed to be sure the board has the latest ROMs for 68040 machines. Fixed? - Contact DayStar Digital Technical Support at 404-967-2077. C HAP T E R I n s t a l l in g T h e T u rb o 040 S o ftw a re...
  • Page 118 Control Panel 1 . Rem ove all third party Control Panel and a n d Extension files from the hard d isk ’ s System Extension Folder. conflicts 2. Restart the M acintosh from the hard disk. (If the M acintosh does not start up properly at this point, it is probably du e to a contam ­...
  • Page 119 System If you have disabled all of the non-Apple s o ftw a r e Control Panel and Extension files and are still con tam in ation having problems, you are probably experienc­ ing system contamination. In order to fix this problem, you will n eed to d o the following: .
  • Page 120 ’ s driver is to rem ove the Turbo 040, update the disk driver and then reinstall the Turbo 040. If you d o not k now w h ich software was used to format your trou­...
  • Page 123 N ow that you have supercharged perform ance w ith the Turbo 040, here are som e software tips to get the m ost from your accelerator. • C heck the Turbo 040 Info section of the QuadControl CDEV. If the 68040 Data...
  • Page 124 68040 * Use versions of software that do not require co m p a tib le you to turn off the data cache, such as: so ftw a r e A/ROSE 1.19 up Acius 4th D im ension 2.2.2 up A dobe ATM 2.03 up A dobe Illustrator 3.0 up A dobe PageM aker 4.0 up...
  • Page 125 ■ I...
  • Page 127 - 4K byte physical data cache (accessible simultaneously) • Processor Turbo 040i (without math functions) - 33 MHz Motorola 68LC040 Turbo 040 (with built-in math functions) - 33 MHz Motorola 68040 - 40 MHz Motorola 68040 • Software - QuadControl Control Panel for...
  • Page 128 Product DayStar Digital, Inc. warrants that it will repair w a rra n ty or replace, at its option, any defective products properly returned to our factory at no addi­ tional charge for a period of THREE (3) FULL YEARS from the date the product is purchased by the original end user.
  • Page 129 “ The A pple System Software M odules are copyrighted program s of A pple Computer, Inc. licensed to DayStar Digital, Inc. to distribute for use only in com bination w ith DayStar prod­ ucts. A pple software shall not be copied onto...
  • Page 130 C om m ents on this m anual are appreciated. Apple and Mac are registered trademarks and Macintosh and SANE are trademarks of Apple Computer, Inc. DayStar Digital, Turbo 040, QuadControl and Power Math are trademarks of DayStar Digital, Inc. DayStar product specifications are subject to change without notice.
  • Page 132 DAYSrAR •••••mmmm ,%V.%VAV , ® • • rn m m m m m * • " • % * • * • * • * • % V * « * » V . . . D I G I T A L 5556 Atlanta Highway Flowery Branch, GA 30542 404.967.2077...

Table of Contents