Advertisement
KEY HINGE
STEAM VENT
GASKET
UPPER
PAN/COVER
HANDLE
WARNINGS:
• Do not use in a microwave.
• Follow all Care & Use instructions before using your pan.
• Do not flip pan when it contains fluids, grease, oils, water, and other liquids as these contents
can leak from the liquid catch trap
• Never attempt to remove or assemble the cover while the pan is hot.
LIQUID
KEY HOLE
CATCH TRAP
LOWER/
BASE PAN
EASY FLIP PAN CARE & USE
The Fusion® nonstick coating makes this pan easy to clean. While the pan is dishwasher
safe, hand washing with a soft dishcloth or sponge is recommended and will prolong the
cookware's beauty. Do not use abrasive or harsh cleaners, as these may damage the finish.
Always preheat your cookware and use low to medium heat when cooking food. This helps
preserve the nutrients in food and the nonstick surface. Preheating requires oil, water or
food to be in the pan. Heating without food, water or oil may cause damage to the pan or
ceramic coating.
Never use metal utensils on any ceramic coating surface. It is recommended that you use
tools made of nylon, plastic, wood, silicone or melamine.
Do not scratch the surface or cut directly on your cookware.
Always use extreme caution when handling hot cookware and keep out of reach of children
at all times.
Do not let handles extend over a hot burner. Doing so may cause the handle to become hot
or cause damage. Always use oven mitts, towel or potholders when handling.
The Easy Flip Pan™ is compatible with induction, ceramic, electric (including glass cook tops),
radiant coil and gas stovetops.
Do not use your Easy Flip Pan™ in a conventional or microwave oven.
The Easy Flip Pan™ consists of 2 individual pans that are interchangeable with each other by
disconnecting and connecting the pans by a hinge. There is one upper pan (cover) and one
lower pan included.
The pans connect by a hinge that opens to a 90° angle. Do not force past the 90° angle as
this could cause damage to the pan. Please follow the directions on the next page of how to
assemble and disassemble your Easy Flip Pan™ before attempting to do so.
To close the pan, bring handles together until the magnets connect.
To flip the pan, first make sure the contents are safe for flipping and carefully check to see if
any liquid has accumulated in the liquid catch trap. If any liquid exists, simply wipe away the
liquid with a towel and proceed to flip the pan.
Allow your cookware to cool before submerging into water.
If the red silicone gasket stretches or loosens it is recommended to cut off any excess and
reinsert. An additional silicone gasket is supplied for your convenience. If needed, remove
the old gasket, insert the replacement silicone gasket into the groove by applying light
pressure and trim away any excess gasket.
Your Easy Flip Pan™ consists of an upper griddle pan and a lower griddle pan. The lower pan
is the deeper pan and contains a liquid catch trap and smooth surface. The liquid catch trap
on the lower pan is opposite the handle and located between the hinges. The liquid catch
trap allows excess steam and liquid to get trapped here. The upper pan is the shallower
pan, and is called the cover when used with the lower pan. See the description on the first
page for reference.
The upper and lower pans can be separated for cooking, cleaning or using the glass lid (not
included). Please see the below instructions for separating pans.
Advertisement
