StressVest SV-PSS Quick Operating Manual

Key Fob Holder
Charging Port
Fuse Holder
On/Off
Toggle Switch
StressVest SIRT RF
®
Note: Ensure you're using StressVest
using the StressVest Portable Sound System.
®
STRESSVEST INC.
1080 Kingsbury Avenue • Winnipeg, MB, Canada R2P 1W5
Ph: (204) 336-0011 • Fax: (204) 586-2049
www.stressvest.com | info@stressvest.com
(Sold Separately)
To Sync a StressVest SIRT RF , press SYNC BUTTON once and pull the trigger on the StressVest
SIRT RF . You should now hear a shot sound to indicate that they are now synced. Repeat this
process to sync additional StressVest SIRT RF's.
To Unsync, hold down SYNC BUTTON for more than 10 seconds and release the button. The SYNC
RF
LIGHT INDICATOR will flash and go out. All previously synced StressVest SIRT RF will now be
cleared including the keyfob.
IMPORTANT: When syncing (SYNC light is on), make sure that no other StressVest devices are
in sync mode (e.g. StressX Belt syncing to the CQT Instructor Tablet or StressX Belt syncing to
SIRT RF when
®
Transmitter). Also, be sure CQT Instructor Tablet is never placed in LIVE mode when Portable
Sound System is syncing.
Quick Operating Guide
Mode Indicator Light
Indicates that auxiliary sound
is muted.
Line Out
Connector for
external speaker
(optional).
Auxiliary In
Connector for
auxiliary sound
cable.
Auxiliary
Volume
Controls volume
from auxiliary
device.
Sync Button
Trigger Indicator Light
Activates on every trigger pull or
key fob activation.
Sync Light
Indicator
If no device is
detected, the light
will come on for a few
seconds, then flash a
few times and go out.
Mute Toggle
Button
Mutes auxiliary
sound.
Master
Volume
Controls volume
from SIRT RF's or
Instructor Key Fob.
SV-PSS
PAGE 1