Thermo Electron Savant SPD111V Instruction Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Instruction Manual

Savant SPD111V

SpeedVac Concentrator

197-3001-00 Rev. C

Table of Contents

Need help?

Do you have a question about the Savant SPD111V and is the answer not in the manual?

Questions and answers

Summary of Contents for Thermo Electron Savant SPD111V

Page 1 Instruction Manual Savant SPD111V ® SpeedVac Concentrator ® 197-3001-00 Rev. C...
Page 2: Table Of Contents
Contents Section Overview Page Overview of the SPD111V Unit Installation of the SPD111V Unit How to Hook Up the SPD111V Unit Section Control Panel Page The Control Panel Description of the Control Panel Section Auto & Manual Run Page The Manual Run The Auto Run Section Rotor Selection...
Page 3: Overview Of The Spd111V Unit
1.0 Overview of the SPD111V Unit Figure 1 = Front View Figure 2 = Side View Figure 3 = Back View Fig. 1 Top Cover (Radiant Cover Optional) Control Panel Front Panel Left Side Panel Anti Skid/Vibration Fig. 2 Right Side Panel Chamber View Window Vacuum Port AC Socket...
Page 4: Installation Of The Spd111V Unit
1.1 INSTALLATION OF THE SPD111V Figure 4-Rear View of System Vacuum Tubing VLP Vacuum Pump SPD111V- SpeedVac ® Concentrator RVT4104- Refrigerated VaporTrap 1.2 HOW TO HOOK UP THE SPD111V SPEEDVAC SYSTEM ® Unpack unit from the box and verify that all the parts match packing list. Read instruction manual carefully! If assistance is required, contact Thermo If the unit is part of a larger system, use the vacuum tubing supplied to...
Page 5: The Control Panel
2.0 SPD111V CONTROL PANEL 2.1 DESCRIPTION OF SPD111V CONTROL PANEL PRE-HEAT - use to pre-heat chamber to 45 C prior to or between runs. ° Once run is initiated the pre-heat stops. RC ON/OFF - Use to add radiant heat to chamber. Manual activation ON/OFF at any point during run.
Page 6: The Manual Run
3.0 THE MANUAL RUN This type of run will allow continuous running of the unit until it is turned off by the user. The heat timer is activate and can be set to a user defined time. Connect the unit to its required voltage. Turn the power switch to ON, located on the back of the unit.
Page 7: The Auto Run
3.1 THE AUTO RUN An automated run will run the unit for a pre-defined time as selected by the user. Refer to the “MANUAL RUN” section for start up. Place sample tubes in rotor so load is balanced. Secure it with rotor supplied knob (hand tight).
Page 8: Rotor Selection Guide
4.0 ROTOR SELECTION GUIDE Working Rotor Number Description Volume (ml) Model of Tubes 1.5 - 2.0 ml 1.2 - 1.6 RH40-11 MICROCENTRIFUGE 1.2 - 1.6 1.5 - 2.0 ml RH64-11 TUBES 1.5 - 2.0 ml RH120-11 1.2 - 1.6 0.5ml (8 x 29mm) RH100-8 GLASS AND 0.4ml (6x 50mm)
Page 9: Guideline For Solvent Choice
5.0 GUIDELINES FOR SOLVENT CHOICE Part I: Solvents suited for the SPD111V unit • Ethanol • Methanol • Water • Acetonitrile Part II: Solvents NOT suited for the SPD111V unit • Methylene Chloride • Chloroform • Ethyl Acetate • Hydrochloric Acid •...
Page 10: Maintenance/Service
6.0 MAINTENANCE/SERVICE Maintenance: The SPD111V SpeedVac requires no scheduled ® maintenance. Cleaning: The SPD111V SpeedVac should be cleaned if solvents spill on ® or inside the unit. Always clean up any spills immediately using absorbent paper towels. Always wear gloves when cleaning and dispose of paper towel in appropriate designated refuse containers.
Page 11: Specifications/Warranty
7.0 SPECIFICATIONS/WARRANTY Model: SPD111V Bleeder Valve: Integrated Automatic Bleeder Valve Temperature Range: C-80 ° ° Volume Range/Tube: 18 x 150 mm Maximum Tube Capacity: Maximum Carrier Capacity: 2 (96-deepwell plates) see chart on page 6 Dimensions: (W x D x H) in.: 14 x 18 x 13 36 x 45 x 33 Weight: lbs.
Page 12: Appendix 1 - Additional Spd111V System Set-Ups
APPENDIX 1 Additional SPD111V System Set-ups Bleeder Vacuum Valve Tubing ANT100 UVS400 ® SpeedVac Concentrator Universal Vacuum Source SPD111V SEMI-INTEGRATED SYSTEM Flexible Vacuum Tubing Bleeder Valve DVG50 RVT400 SCT120 VLP120 ® SpeedVac Concentrator Cold Trap Chemical Trap Vacuum Pump SPD111V COMPONENT HIGH VACUUM SYSTEM...
Page 13 SPD-SERIES SPEEDVAC FAMILY ® SPD101B SPD111V SPD121P...
Page 14 +81 45 453 9122 Saint-Petersburg Fax: +81 45 453 9222 +7 812 325 8045 Fax: +7 812 186 1194 © 2001-2004 Thermo Electron Corporation, All rights reserved. Thermo Electron Corporation, SpeedVac, and Analyze, Detect, Measure, Control, are trademarks of Thermo Electron Corporation.