Raider 110216 Instructions page 2

Refer to instruction manual / booklet!
INSTRUCTIONS FOR USING THE GASKET FOR POLE SAW HEAD WITH TUBE
FOR GASOLINE BRUSH CUTTER,
АРТ. № 110216
• Description and function
Brush cutter RD-GBC10 can be used with accessories sold separately - pole saw, art. No. 110216,
which facilitates the removal of tall branches. The device has a long handle, which is suitable for
working in inaccessible areas when cutting up shrubs. The pole saw can also be used to support
public parks and gardens.
• Fill up the tank of the petrol with oil. / FIG. 1 /.
Unscrew the oil filler cap of the chain.
Pour in oil (be careful not to get any contaminants in the tank). Screw the oil tank cap back on. You
should not use used or reclaimed oil as this can cause damage.
Use SAE 10W / 30 oil all year round. In summer SAE 30W / 40 and in winter SAE 20W / 30.
Extremely chain saw lubricants must be used. Used or reclaimed oil should never be used to lubri-
cate the chain.
The chain lubrication is automatic. When handling the pole saw, make sure that there is oil in the
tank.
• Fitting the gasket for brush cutter / fig. 1 and FIG. 2 /:
Disassemble the gasket RD-GBC10 Gas Connector / Connector /, insert the pole saw and tighten.
Place for joining the
BRUSH CUTTER
Cap on
Connector
the oil tank
coupling
FIG. 1
FIG.2
Pole saw RD-GBC10
for RD-GBC10