Do you have a question about the FIRETOOLS FF1-S and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for Timberline Tool FIRETOOLS FF1-S
Page 1
Instruction Manual Model FF1-S Fire Hose Clamp For your personal safety SAVE these instructions READ and UNDERSTAND for future reference. instructions before using tools.
TIMBERLINE FF1-S INTRODUCTION Timberline Firefi ghter Clamps are designed to be used to temporarily stop the pressurized fl ow of water in canvas, rubber or synthetic hose without permanent- ly damaging the hose. Prior to using a Timberline Firefi ghter Clamp, the user should consult and observe any recommendations or precautions from hose manufacturers and industry standards.
Page 5
TIMBERLINE FF1-S Personal Safety Stay Alert, watch what you are doing, and do not use tools while tired or under the infl uence of narcotics, alcohol, or medication. Use proper clothing, eye protection, and safety equipment when using shut-off clamps. A moment of inattention while operating shut-off tools may result in personal injury.
Page 7
TIMBERLINE FF1-S To begin removal of the tool from the hose, place your foot on the footpad and fi rmly grip the top handle with both hands. Fig 5 To complete the removal of the tool, pull the handle up until the clamp passes “over center” and the jaws unlock.
Page 8
ACCESSORIES Any accessories or attachments recommended for use with your Timberline Tool are specifi ed in this manual. The use of any other accessories or attachments might present the risk of injury. Only use accessories or attachments for their stated purpose.
Page 9
800.735.6845 to obtain return authorization for repair. If inspection shows the trouble is caused by defective workmanship or material, Timberline Tool will repair or, at our option, replace the product without charge.
Need help?
Do you have a question about the FIRETOOLS FF1-S and is the answer not in the manual?
Questions and answers