Related Manuals for Felix Storch FXV-H1304
Summary of Contents for Felix Storch FXV-H1304
- Page 1 ─ 4CH DVR ─ FXV-H1304 USER MANUAL This document contains preliminary information and subject to change without notice.
- Page 2 WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. NOTE: This equipment has been tested and found to comply with the limits for a class digital device, pursuant to part 15 of the FCC Rules.
-
Page 3: Table Of Contents
Table of Contents CHAPTER 1 PACKING DETAIL AND INSTALLATION _____________________ 5 1-1 PACKING ___________________________________________________ 5 1-2 Hard Disk Installation ________________________________________ 6 CHAPTER 2 PANEL LOCATION ________________________________________ 8 2-1 FRONT PANEL CONTROLS ___________________________________ 8 2-2 8CH REAR PANEL CONNECTORS _____________________________ 9 2-3 4CH REAR PANEL CONNECTORS ____________________________ 10 CHAPTER 3 LIVE, PLAYBACK AND PTZ OPERATIONS _________________ 11 3-1 LIVE Mode ________________________________________________ 11... - Page 4 CHAPTER 6 Remote Software Installation and Setup ____________________ 45 6-1 AP Software Installation and instruction ______________________ 45 6-2 How to do remote monitoring through IE _____________________ 47 6-3 How to do remote monitoring through JPEG VIEWER(Only Monitor Function) _____________________________________________________ 48 6-4 AP Software Operation ______________________________________ 50 CHAPTER 7 SPECIFICAITONS _______________________________________ 51 CHAPTER 8 MOBILE APPLICATION INSTALLATION AND USAGE __________ 53...
-
Page 5: Chapter 1 Packing Detail And Installation
CHAPTER 1 PACKING DETAIL AND INSTALLATION 1-1 PACKING 1. DVR 2. Quick Start 3. IR Remote Control 4. SATA Cord 1pcs 5. CD 6.Screws x4 7. Power Adaptor Note: Standard shipping products include neither HDD nor DVD R/W 4CH DVR_FXV-H1304 User Manual... -
Page 6: Hard Disk Installation
1-2 Hard Disk Installation Step１)：Take out the screws as pictures show。 Back panel 3 screws Left 1 screw Right 1 screw Step 2 ) ：Open the cover follow the arrow direction。 4CH DVR_FXV-H1304 User Manual... - Page 7 Step３)：Connect SATA & Power wire to Hard Disk and put it on right position of the bottom case。 Step４) ：Fix the Hard Disk with four screws on the bottom case as the picture indicated。 Step５)：Put the cover back and fix it with 5 screws as Step 1 indicated. Note: After installation, please initialize Hard Disk before starting to record.
-
Page 8: Chapter 2 Panel Location
CHAPTER 2 PANEL LOCATION 2-1 FRONT PANEL CONTROLS ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪ ⑫ ⑬ ⑭ ⑮ ⑯ ⑰ ⑱ Start or stop recording. ① REC Play back in normal speed. ② PLAY Display the search menu. ③... -
Page 9: 8Ch Rear Panel Connectors
2-2 8CH REAR PANEL CONNECTORS ① ④ ⑤ ⑧ ② ③ ⑥ ⑦ ⑨ ① VGA VGA port ② DC 12V DC 12V power jack ③ MAIN/SPOT monitor MAIN/SPOT monitor BNC Video output ④ VIDEO IN For cameras BNC input ，8 ports ⑤... -
Page 10: 4Ch Rear Panel Connectors
2-3 4CH REAR PANEL CONNECTORS ③ ④ ① ② ⑤ ⑥ ⑦ ⑧ ⑨ ① DC 12V DC 12V power jack ② VIDEO OUT MAIN/SPOT monitor BNC Video output ③ VIDEO IN For cameras BNC input ，4 ports ④ AUDIO IN RCA input( For CH1) ⑤... -
Page 11: Chapter 3 Live, Playback And Ptz Operations
CHAPTER 3 LIVE, PLAYBACK AND PTZ OPERATIONS The IR remote control and mouse operate differently under each mode; this chapter describes the functions of them under three different modes: LIVE, PLAYBACK and PTZ. 3-1 LIVE Mode You can monitor all the channels, listen to audio signal and have some related operations under LIVE mode. - Page 12 Table 3-1.2 Graphical icons that will display after right-clicking your mouse under LIVE mode. Icon Description Resting the cursor on this icon will bring up the following four menu icons. Main menu. Search menu. Backup menu. PTZ mode. Turn on/off recording. Playback.
- Page 13 Table 3-1.3 Description of on screen graphical icons in LIVE mode Icon Description Recording is on Schedule Recording is on Live Audio is on Live Audio is off Motion detected on the channel Video loss detected on the channel USB device detected Connected to the LAN cable.
-
Page 14: Playback Mode
3-2 PLAYBACK Mode Switch to PLAYBACK mode by pressing “PLAY” under the LIVE mode, the graphical icon will show up on the upper center of the screen and the operation panel ( see below picture) will show up at right lower corner of the screen. You can drag the panel by mouse to place it on any location of your screen. - Page 15 Table 3-2.2 The mouse operation under the PLAYBACK mode. Icon Description 「 」 Fast rewind 「 」Fast forward Play/pause ／ 「▢ / SLOW」 ，slow playback 「▼ / ■」stop playback Playback channel by channel with snap shot display Full screen display Quad display 9 screen display Zoom-in display...
-
Page 16: Ptz Mode
3-3 PTZ Mode Switch to the PTZ mode by pressing “PTZ” button under the LIVE mode. The PTZ icon will appear on upper left side of screen and the control panel will appear on the down right side of screen. Table 3-3.2 Mouse operation under the PTZ mode Icon Description... -
Page 17: Chapter 4 Main Menu Setup
CHAPTER 4 MAIN MENU SETUP To enter the main menu and set up DVR, log-in account and user password are required. The default password of the administrator is “123456”. Please check the “Account Setup” for related setup of other log-in users. Table 4-0.1 Some definition of virtual keyboard. -
Page 18: Record Setup
Table 4-0.2 The operation of remote control under the setting menu Item Description Switch to different options under one item Switch to different items MENU Save setup and back to LIVE mode Back to Upper level of menu without saving ENTER Enter the menu, or display virtual keyboard PS. -
Page 19: 4-1.1 Quality & Frame Rate Setup
4-1.1 Quality & Frame Rate Setup Item Description Normal setup/ Select recording mode event setup Select recording resolution: NTSC:352x240, 704x240, 704x480 Resolution PAL:352X288,704X288,704X576 Record Type You can setup quality and FPS separately for record type. Check/uncheck the box enable/disable selected channel recording Quality Select quality: Below Basic/ Basic/ Normal/ High/ Highest Select recording frame rate. -
Page 20: 4-2.1 Motion Setup
4-2.1 MOTION SETUP Item Description When motion detect，the number of seconds continuous alarm Alarm Duration(Seconds) You can setup independently for each channel. Enable Check the box to Enable/Disable motion detection for each channel. Drag the white bar or press ◀ ▶ to set up Sensitivity from valu Sensitivity e 1 to 10 for each channel. -
Page 21: Schedule Setup
Item Description Switch between “select” and “deselect” for cursor-dragging function Mask Mouse Selection All Area Detection Select entire screen as detection area. Mask All Area Deselect entire detection area. Continue Continue setup Exit & Save Save setup and leave Exit & Discard Cancel setup and leave 4-3 SCHEDULE SETUP Except from starting recording manually, you can also setup the recording time by weeks... -
Page 22: 4-3.1 Schedule Record Setup
4-3.1 Schedule Record Setup Click on the time on the left side. The setup menu will be displayed. You can have detail setup by dates, Time and event. 4-3.2 Holiday Setup Since holidays are different by different country and region, you can setup the holiday of your location accordingly. -
Page 23: Camera Setup
4-4 CAMERA SETUP Item Description You can setup independently for each channel. Mask Check the box to Enable/Disable mask function for LIVE mode Drag the bar or press ◀ ▶ to adjust Sharpness of your camera from Sharpness value 0 to 15. The default value is 1. Drag the bar or press ◀... -
Page 24: Account Setup
4-5 ACCOUNT SETUP The Account Setup menu is used to provide role-based permission independently setting for each user (maximum of 4 users) to access DVR over network. The default admin account and password is “admin” and “123456” (The default password remains the same after firmware upgrade) Item Description Check to activate the user‟s account. -
Page 25: 4-5.2 User Picture Setup
4-5.2 User Picture Setup User can select picture wished to be changed to from hard drive. 4-6 NETWORKING SETUP Item Description Connect type Setup mode for network connection: (ADSL、DHCP、LAN、3G). HTTP Setup Enter to set up HTTP DDNS Setup Enter to set up DDNS Mail Setup Enter to set up mail 3G Setup... -
Page 26: 4-6.1 Networking Setup
4-6.1 NETWORKING SETUP There are three ways to connect to the network as followed. 4-6.1.1 DHCP When DHCP is selected, IP address will be assigned by DHCP server automatically. 4-6.1.2 LAN Select LAN for network connection, the following information is required. Item Description IP Address... -
Page 27: 4-6.1.3 Adsl
4-6.1.3 ADSL Select ADSL for network connection, the following information is required. Item Description User Name Enter user name provided by ISP Password Enter password provided by ISP 4-6.1.4 3G Select 3G for network connection, the following information is required. Item Description Dial-up Number... -
Page 28: 4-6.2 Http Setup
Item Description Enable Enable advance setting User Name Enter ISP username Password Enter ISP password IP Address Enter the ISP provides a fixed IP address。 (if the client uses the Internet only need to enter a fixed IP) PS：This feature currently only supports the Huawei 3G card 4-6.2 HTTP Setup Item Description... -
Page 29: 4-6.3 Ddns Setup
4-6.3 DDNS Setup Item Description Enable DDNS Enable/disable DDNS function. Enter the registered SMTP Server: DDNS Server 、 、 DYNDNS.ORG 、 NO-IP.ORG 、 3322.ORG ez-dns＊ I-DVR.NET＊ Host Name Enter the completed registered SMTP Server. (Including username + Server) If the user name is h.264 and you choose i-dvr as your server, you should enter: h.264.i-dvr.net User Name... -
Page 30: 4-6.4 Mail Setup
4-6.4 Mail Setup When event occurs (VLOSS, MOTION), email will be sent to the receiver account automatically. Item Description Enable E-mail Notification Check the box to enable/disable E-mal Notification function. Enter to set up SMTP Server name. SMTP Server (Varies according to the user) User Name Enter to set up User Name. -
Page 31: Ptz & Rs485 Setup
4-7 PTZ & RS485 SETUP The DVR allows users to control PTZ functions of your camera. To enable PTZ function, the 485 cable should be connected to the RS-485 port of DVR. Item Description Enable PTZ Click the box to Enable/Disable PTZ function for each channel. Protocol Set up the protocol of PTZ cam. -
Page 32: System Setup
4-8 SYSTEM SETUP Item Description DVR Name The name of DVR will be shown when users login from remote access. DVR Location The location of DVR will be shown when users login from remote access Click or press ▼ to select OSD language. Language Remote ID Default ID is 0. -
Page 33: 4-8.2 Date/Time Setup
Item Description Auto-Seq Interval Set up duration time in seconds for the interval between channels under Auto-Seq mode. Show OSD Turn On / Off OSD display Show DVR Status Turn On / Off DVR illustration and record status display Show Date/Time Turn On / Off date and time display Show Channel Name Turn On / Off channel name display... -
Page 34: 4-8.2.1 Change Date & Time
4-8.2.1 CHANGE DATE & TIME Setup date and time of DVR manually according to user‟s local time. 4-8.2.2 TIME ZONE AND DAYLIGHT SAVING TIME SETUP Set up time zone and activate Daylight Saving Time function according to user‟s DVR location. Item Description Select Time Zone... -
Page 35: 4-8.2.3 Internet Time Setup
4-8.2.3 INTERNET TIME SETUP Synchronize your DVR time with internet time server. Item Description Check to enable DVR automatic synchronization function. Automatic Effective by this option selected, DVR will automatically Synchronization synchronize the time upon rebooting or by every 24 hours after booting. - Page 36 Item Description Key Tone Enable/Disable keystrokes. Enable/Disable buzzer operation when the alarm is triggered for Buzzer HDD Error, Motion and Vloss (Video Loss). 4CH DVR_FXV-H1304 User Manual...
-
Page 37: Utility Setup
4-9 UTILITY SETUP Item Description Select to enter hard disk initialization menu. Please stop HDD Initialization recording before entering this menu. Enter the menu, system will show all the data (model ,volume ) of HDD that installed in DVR. Check the HDD you‟d like to initialize then press “Start”. -
Page 38: Diagnostic
4-10 DIAGNOSTIC Item Description Version The current firmware version of DVR The connected IP address of DVR. If disconnected from network, the screen will display” NETWORK DISCONNECT”. MAC Address of DVR HDD Status HDD number Volume HDD Capacity Used Rate Percentage of space used on HDD. -
Page 39: Chapter 5 Backup & Search
CHAPTER 5 BACKUP & SEARCH 5-1 BACKUP SETUP User can backup any segment of recorded data in a specified time frame. To do so, either a CD R/W or storage device, like USB, must be connected to the DVR. The format of backup file is IRF file that can be played by both “Ifileplay”... - Page 40 iFileplay Use Method Step 1: install 「iFileplay」 software to your PC. You can get 「 iFileplay」 file from the CD with DVR Packing. PS: When you using USB to backup file, iFileplay.exe will copy to USB with the backup file automatically. Step 2：Setup「ifileplaypack.exe」...
- Page 41 Step 4：Ifileplay software will play the backup file automatically. Step 5：If there is no display on the screen, The backup file is not our DVR recording format. Please check it. 4CH DVR_FXV-H1304 User Manual...
-
Page 42: Search Setup
5-2 SEARCH SETUP Item Description Event Search Event search menu Time Search Enter time search menu 5-2.1 EVENT SEARCH The DVR automatically records events with type, time and channel information included. If there is recording data for an event, a yellow signal will be shown on the left side of time information. -
Page 43: 5-2.1.1 Criteria Setup For Event Search
Item Description Criteria Setup conditions of event search Page Switch between pages of events Date/Time Date/time when event occurred. Event type, defined as following MOTION Motion Detected Video Loss Video Loss Remote Login user log-in over the network Remote Logout user log-out over the network Event Type Power On... -
Page 44: 5-2.2 Time Search
5-2.2 TIME SEARCH TIME SEARCH can search for the specific time of recording data to playback. Press “Enter” or left click on the desired date to playback. Note that dates with recording data are marked with a red square “ “System will start playing back according to the date you selected. -
Page 45: Chapter 6 Remote Software Installation And Setup
CHAPTER 6 Remote Software Installation and Setup 6-1 AP Software Installation and instruction AP software:「DVR Remote Desktop」can allow you to remotely access and control the DVR from PC. p.s. Operation system currently supports Windows XP SP2 and above and Window s Vista, Windows 7 Step One：Enter the IP address of DVR in IE browser Step Two: Windows as below will show up. - Page 46 Step Four: Run or Save our AP software. Step Five: If you choose to run the software, Start window will be shown up. Please enter information of login DVR: IP, Port, Username and Password, or choose “Play Recorded File” to open backup files in your PC. Step Six: You‟ve logged into the DVR 4CH DVR_FXV-H1304 User Manual...
-
Page 47: How To Do Remote Monitoring Through Ie
6-2 How to do remote monitoring through IE Step One：Enter the IP address of DVR in IE browser. The address appeared in this image is only for demonstration. Actual address is depending on the setup of on-site DVR. Step Two: Windows as below will show up. Please enter the user name and password. Default user name and password is admin/123456. -
Page 48: How To Do Remote Monitoring Through Jpeg Viewer(Only Monitor Function)
Step Four: DVR images appear. 6-3 How to do remote monitoring through JPEG VIEWER(Only Monitor Fun ction) Step One：Enter the IP address of DVR in IE browser. The address appeared in this image is only for demonstration. Actual address is depending on the setup of on-site DVR. Step Two: Windows as below will show up. - Page 49 Step Three: Click on “Jpeg Viewer” Step Four: DVR images appear. PS : Only for viewer, without any operation function. 4CH DVR_FXV-H1304 User Manual...
-
Page 50: Ap Software Operation
6-4 AP Software Operation Open the file “DVRemoteDesktop.exe”; enter the information of DVR “IP address”, “Port” “Username” and “Password” and click “OK”. You should be able to login DVR successfully and start to use the software. The default username and password is 「admin/ 123456」 “DVRemoteDesktop.exe”... -
Page 51: Chapter 7 Specificaitons
CHAPTER 7 SPECIFICAITONS 1. VIDEO Input Level 1.0 Vp-p±10% Composite, 75 Balanced NTSC 120fps Display Speed 100fps NTSC 720(H) X 480(V) Display Resolution 704(H) X 576(V) Monitor Output 2Vp-p Composite, 75 Balanced 2. RECORDING Compression Method H.264 Recording Speed Refer to table 7-1 NTSC 704 X 480, 704 X 240, 352 X 240 Recording Resolution... - Page 52 Dimension 225(W) x 215(D) x 46(H) mm Weight 0.95kg ( without HDD) 9. BACKUP USB Stick Video Data, Audio BACKUP Network Video Data, Audio 10. SEARCHING & PLAYBACK Searching Type Event/ Time Playback speed 120 FPS 11. MULTI-REMOTE SURVEILLANCE Monitoring Environment Web / Client Software(CMS) Max.
-
Page 53: Chapter 8 Mobile Application Installation And Usage
CHAPTER 8 MOBILE APPLICATION INSTALLATION AND USAGE You can remotely monitor all channels of DVR through your mobile device. The required mobile application is from DVR manufacturer and it supports mobile OS for 1. Windows mobile 5.0 above. 2. Symbian. 3. -
Page 54: Chapter 9 Cms Installation And Usage Guide
CHAPTER 9 CMS INSTALLATION AND USAGE GUIDE 9-1 CMS Installation System Requirement: Intel Pentium 4 processor or equivalent. ＊ Microsoft Windows Vista、Windows XP、Windows 2003 Server. ＊ Besides OS and other required APs, there will be 512MB remaining memory needed or above. ＊... - Page 55 6. Select „Close’ to finish installation when the “Installation Complete” window shows. 4CH DVR_FXV-H1304 User Manual...
-
Page 56: Cms Login And Environment
Instruction for Log-in Failure to CMS after Upgrade Log in to CMS with the default account and password after CMS upgrade. If an error message occurs as shown in the image, please follow the instruction to solve the error. Step 1: Please enter file manager to enter folder, “Windows” and then folder “Systme32” (ex:C:\Windows\System32) Step 2: Locate file, “iCMS.dat”... - Page 57 ENVIRONMENT To enter CMS, the administrator‟s user name and password are required. The defaults are „admin‟ and „123456‟. After successful login, the following image shows on your screen: ③ ① ② ④ ⑤ 步驟5: 完 成 步 驟 4 後 ， 將...
-
Page 58: Dvrs, Groups & Events
9-3 DVRs, Groups & Events Icon Description View list of logged in DVR／ Group. View Logs: list all the event information of DVR ／ 9-3.1 View DVR Group List Single left click on „DVR’ or „Group’ will expand/collapse the entire DVRs and groups list. -
Page 59: 9-3.2 View Event Logs
9-3.2 View Event Logs Under this page, all the events of a DVR can be expanded/collapsed in the order of Re mote in/Remote out, Video Loss, Motion, Sensor, Others (Power Reset, Key Lock, Key Unlock, HD Full). 9-4 Local PC Information and Control Located at the left lower corner of the screen, please see the chart below: Icon Function... -
Page 60: Main Display
9-5 Main Display The main display area is where the live image of DVR is shown. You can drag to change the location of screen for each channel and turn on/off audio signal with mouse-click. 9-5.1 Audio Control In live mode, you can turn on/off the audio signal of Ch1~Ch4: 「... -
Page 61: 9-5.2 Emap Display
9-5.2 eMAP Display In Live mode, pressing will bring the e-MAP drag-down menu. If the channel has been set up to use e-MAP, the menu will show all the e-MAP titles that have been entitled to this channel; otherwise, “No eMaps” will be shown. Please check “9-6.4 eMAP administration”... -
Page 62: 9-5.3 Ptz Control
9-5.3 PTZ Control In the main display, right click on the channel will bring up PTZ control panel as below. Icon Description 8 direction key Rotate the PTZ ZOOM+：Zoom in ZOOM : Zoom out Setup the PTZ spot as pre-set N. FOCUS+ : Focus in FOCUS-：Focus out Move to pre-set N. -
Page 63: Operation Bar
9-6 Operation Bar 10 Operations to be listed as below: Table 9-6.1 description of 10 operations: Icon Description User Administration. Please see “9-6.1 User administration” DVR Administration. Please see “9-6.2 DVR Administration” Group Administration. Please see “9-6.3 Group Administration” eMap Administration. Please see “9-6.4 eMap Administration”. Remote Playback. -
Page 64: 9-6.1 User Administration
9-6.1 User administration Before the CMS can be used on a PC, user accounts should be added with proper authority. Each user should also be assigned a password and optionally a description. If a user does not have certain authority assigned, he/she will not be able to operate the corresponding function on the Operation Bar. -
Page 65: 9-6.2 Dvr Administration
9-6.2 DVR Administration DVR connections can be added to or deleted from the CMS and their information can be edited. DVR‟s channel names can be entered here or downloaded from the DVR by pressing „From Select “OK” to save the information. DVR‟. - Page 66 3. Check the specific channels that you‟d like them to be included in the group. To include all channels of a DVR, just check the DVR.(1 Group up to select 64 camera) 4. Click “OK” to return to the previous window. 5.
-
Page 67: 9-6.4 Emap Administration
9-6.4 eMap Administration If geographical locations are relevant, or if it is desired to use a picture as the background, eMap can be used for the purpose. With eMap, the background picture can be picked by the user and channels from multiple DVRs can be placed and dragged around on the picture. Steps to follow: 1. - Page 68 5. Click OK to save. 4CH DVR_FXV-H1304 User Manual...
-
Page 69: 9-6.5 Remote Play
9-6.5 Remote Play Video images recorded on a DVR can be displayed on a remote CMS. With Remote Play function, select a DVR and a display mode on top of the screen. After the recorded segments are listed below, double click on one to show its image on the right. Icon Description Start playing. -
Page 70: 9-6.6 Hdd Playback
9-6.6 HDD Playback You can directly play the recording data in the HDD that‟s uninstalled from DVR by CMS. See the picture below, the left part of screen is recording data in list that‟s separated by hour and the right part is main display. You can change the display modes and play files fast forward or rewind. -
Page 71: 9-6.7 File Playback
9-6.7 File Playback You can play the recorded .irf files by “File Play” in CMS. It allows you to change the display mode, forward or rewind the file and drag the time bar. Icon Description Start playing. Pause. Stop playback. Fast forward. -
Page 72: 9-6.8 Event Playback
9-6.8 Event Playback Event recordings on the DVR can be played back in CMS. Steps to follow: 1. Select a DVR and a display mode. 2. Select a date. 3. Double click an event and play back the images on the right. Use buttons at the bottom to control the playback. -
Page 73: 9-6.10 Recording Data
9-6.10 Recording Data It can play all the recording files you‟ve recorded in line in “Recording Data”. You can play or delete them here. Steps to follow: 1. Choose the recording time at upper left corner, it will be played on the main display. 2. -
Page 74: Appendixⅰ I-Dvr.net Registration
APPENDIXⅠ I-DVR.NET REGISTRATION DDNS Registration on I-DVR.NET In the package of each DVR, you will find a sticker shows account information including username and password that allows users to login I-DVR.NET for registration. To register DDNS on I-DVR.NET, please follow the steps as shown. Step 1. - Page 75 Step 4. Enter DVR →Main Menu → Network Setup → DDNS. Activate DDNS functions and input related information. DDNS work properly when this option selected. This part of the information required and the same within the i-dvr.net Step 5.Back to the i-dvr.net, on this page by pressing "F5: Refresh", IP will be automatically updated into the DVR of the real IP location.
-
Page 76: Appendixⅱ Ez-Dns Registration
APPENDIXⅡ ez-dns REGISTRATION DDNS Registration on ez-dns.com In addition to I-DVR.NET the Company, the other has a ez-dns.com server may be used.. To register DDNS on ez-dns.com, please follow the steps as shown. Step 1. Please open IE browser and then enter “ ”... - Page 77 Step 3. The “host.domain” column will show up the setup just entered. Next, enter the DVR the same time setting the DDNS client machine information If DDNS set up at DVR side successfully, the website will update the IP information in 10 minute.
- Page 78 DDNS work properly when this option selected. This part of the information required and the same within the ez-dns.com Step 5.Back to the ez-dns.com, on this page by pressing "F5: Refresh", IP will be automatically updated into the DVR of the real IP location. 4CH DVR_FXV-H1304 User Manual...
-
Page 79: Appendixⅲ Remote Monitoring Ie Activex Control Installation Instruction
APPENDIXⅢ Remote Monitoring IE ActiveX Control Installation Instruction When using IE for remote monitoring for the first time, IE ActiveX Control is needed to be downloaded. 1. When remote monitoring on IE for the first time, an alert message occurs “Install ActiveX control”... - Page 80 4. After installation, IE remote monitoring image appears. 5. If message, “Your security Settings do not allow web sites to use ActiveX controls installed on your computer.” pops on when logging in, please follow the next instruction. 6. First select “Tools” on the tool bar and then select “Internet Options” 4CH DVR_FXV-H1304 User Manual...
- Page 81 7. Select Security →Trusted Sites → Sites 8. Enter DVR address (This address is only for demonstration. Please use the address depends on the setup of on-site DVR.) into the blanks shown in picture, and then press “add.” 4CH DVR_FXV-H1304 User Manual...
- Page 82 9. Newly added website will appear at the trusted web sites list. Press close. 10. Go back to IE window, press refresh button or F5. 4CH DVR_FXV-H1304 User Manual...